SEW-Eurodrive MOVITRAC LTE-B User Manual (English)

Other manuals for SEW-Eurodrive MOVITRAC LTE-B

Questions and Answers:

M
Mia Knight MDAug 3, 2025
What to do if SEW-Eurodrive Inverter Drive will not enable and display remains on "StoP"?
- C
  cody50Aug 3, 2025
  If your SEW-Eurodrive Inverter Drive display remains on "StoP", check that the hardware enable signal is applied to digital input 1. Ensure the User +10 V output voltage (between terminals 5 and 7) is correct; if not, check wiring to the user terminal strip. Check P-12 for terminal/keypad mode; if keypad mode is selected, press the button. Also, verify that the supply voltage is within the specified range.
G
gina62Aug 9, 2025
What to do if SEW-Eurodrive Inverter Drive experiences overload or over-current – motor does not spin?
- J
  James BruceAug 9, 2025
  If your SEW-Eurodrive Inverter Drive motor doesn't spin and shows an overload or over-current error, check for a locked rotor. Also, verify that the mechanical brake, if fitted, is released.
B
Bradley DavisAug 15, 2025
Why SEW-Eurodrive Inverter Drive trips on overload or over-current on unloaded motor during acceleration?
- J
  Jocelyn PatelAug 15, 2025
  If your SEW-Eurodrive Inverter Drive trips on overload or over-current during acceleration with an unloaded motor, check the Star/Delta terminal connection in the motor. Ensure that the rated operating voltage of both the drive and the motor match. Note that the Delta connection always corresponds to the lower voltage rating of a dual voltage motor.
J
Jessica AnthonyAug 21, 2025
How to access extended menus on SEW-Eurodrive Inverter Drive?
- L
  Latoya Miller PhDAug 22, 2025
  To access extended menus on your SEW-Eurodrive Inverter Drive, ensure that P-14 is set to the extended access code, which is typically "101" unless the code in P-37 has been changed by the user.
C
Candace SullivanAug 27, 2025
What to do if SEW-Eurodrive Inverter Drive will not power up in very cold ambient temperatures?
- B
  Bryce MeyersAug 27, 2025
  If your SEW-Eurodrive Inverter Drive fails to power up in very cold ambient temperatures (less than –10 °C), ensure that a local heating source maintains the ambient temperature above 0 °C.

SEW-Eurodrive MOVITRAC LTE-B Specifications

General

Brand	SEW-Eurodrive
Model	MOVITRAC LTE-B
Category	DC Drives
Language	English

Summary

Important Notes

Structure of the safety notes

Explains how safety notes are structured with symbols and signal words.

Application environment

Lists forbidden applications and conditions for safe operation.

Waste disposal

Instructions for proper disposal of electronic waste and materials.

Safety Notes

Installation and startup

Critical safety precautions and requirements for installing and starting the drive.

Operation and servicing

Safety warnings and procedures for operating and maintaining the unit.

General specifications

Input voltage ranges

Specifies the acceptable input voltage and frequency ranges for the drives.

Product designation

Details the meaning of each part of the product's identification code.

Overload capability

Describes the drive's ability to handle overcurrent conditions for specific durations.

Protection features

Lists the built-in safety mechanisms like over-voltage, over-temp, and short-circuit protection.

Mechanical Installation

Dimensions

Overview of drive sizes and weight for different housing types.

IP20 housing: mounting and dimensions of switch cabinet

Guidelines for mounting drives in switch cabinets and their dimensions.

Dimensions of vented switch cabinet

Cabinet dimensions for vented enclosures, including air flow.

Electrical Installation

Prior to installation

Essential checks and preparations before installing the drive unit.

Installation

General instructions for installing the drive, including grounding and cabling.

Drive and motor connection

Wiring diagrams for connecting the drive to the motor and power supply.

Signal terminals overview

Description and pin assignment of the control and signal terminals.

UL-compliant installation

Specific requirements and guidelines for installations adhering to UL standards.

Electromagnetic compatibility

Information on EMC standards, immunity, and emissions for compliant installation.

Startup

User interface

Description of the drive's keypad and 7-segment display for operation and setup.

Easy startup

Step-by-step guide for quickly setting up and starting the drive.

Startup for operation via Fieldbus

Procedures for setting up the drive for fieldbus communication.

Operation

Drive status

Information on how to read and interpret the drive's operational status indicators.

Service and fault codes

Troubleshooting

Common issues, symptoms, causes, and solutions for drive problems.

Fault codes

Detailed explanations of error messages and corresponding troubleshooting steps.

SEW electronics service

Information and requirements for sending units for repair or service.

Parameters

Standard parameters

Description of commonly used drive parameters for configuration.

Extended parameters

Description of advanced parameters for fine-tuning drive functionality.

P-15 Digital inputs function select

Configuration options for assigning functions to digital inputs.

Real-time monitoring parameters (read-only)

Parameters used for monitoring drive status and performance.

Technical Data

Conformance

List of international standards and directives the product complies with.

Environmental

Specifications for ambient temperature, humidity, and altitude ranges.

Output power and current ratings

Technical specifications for power output and current capacity.

Related product manuals

SEW-Eurodrive MOVITRAC LTP-B

232 pages

SEW-Eurodrive MOVITRAC B

113 pages

SEW-Eurodrive MOVITRAC 31C

68 pages

SEW-Eurodrive MOVITRAC 0500

25 pages

Movimot MM**D Series

200 pages

SEW-Eurodrive MOVITRAC LTE-B User Manual

Table of Contents