Need help?Do you have a question about the SEW-Eurodrive MOVITRAC 31C and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Enclosure Rating | IP20 |
| Output Current | Up to 18A |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature |
| Communication Interfaces | RS485 |
General safety warnings for inverter operation and maintenance.
Limitations and specific conditions for the inverter's use and installation.
Guidelines for proper disposal of unit components according to regulations.
Guidelines for safe installation and initial startup of the inverter.
Safety precautions during operation, servicing, and maintenance of the inverter.
Explains the inverter's type designation, nameplate details, and option label.
Detailed view of Size 0 unit, identifying various components and terminals.
Detailed view of Sizes 1 and 2 units, identifying components and terminals.
Detailed view of Sizes 3 and 4 units, identifying components and terminals.
General instructions for installing the inverter, including safety and mounting guidelines.
Guidelines for ensuring electromagnetic compatibility (EMC) during installation.
Specific requirements for installing the inverter to meet UL certification standards.
Shows the wiring diagram for the power section and brake connections.
Details the wiring diagram for the processor card and associated terminals.
Explains the function of each terminal on the basic unit.
Lists assignments of braking resistors, chokes, and filters for 230V units.
Instructions for installing a braking resistor into Size 0 units.
Wiring and connection details for the RS-232 serial interface.
Wiring and connection details for the RS-485 serial interface.
Step-by-step guide for installing various option cards into the inverter.
Details wiring and terminals for the FEA31C input/output expansion option.
Details wiring and terminals for the FI031C digital input/output option.
Details wiring for FEN31C speed detection and FPI31C position detection.
Details wiring and terminals for the FIT31C TF/TH evaluation option.
Instructions for connecting incremental encoders for speed and position control.
Essential preparations and tools needed before starting up the inverter.
Explains the keypad functions for navigating and operating the inverter.
Steps to change the display language using the short menu.
Steps to change the display language via the detailed parameter menu.
Step-by-step guide for a quick and basic startup of the inverter.
How to operate the drive using analog setpoint signals and terminal inputs.
How to operate the drive using pre-defined fixed setpoints via terminals.
How to operate the inverter manually using the FBG31C keypad without external commands.
General notes and initial parameter settings for startup examples.
Provides example values for BOOST and IxR settings based on motor type.
Specific startup procedure for travel, group, pump, or fan drives.
Specific startup procedure for hoist drives, with and without counterweight.
Instructions for setting up the speed controller for FRN31C/FEN31C options.
A comprehensive list of all available parameters with their settings.
Explains the meaning of different LED colors and their indications during operation.
Describes the basic displays shown on the FBG31C keypad.
Details the functions of the FBG31C keypad for parameter copying and menu navigation.
Lists parameters available in the FBG31C keypad's short menu.
Explains various error and status messages displayed by the inverter.
Describes how to identify and obtain detailed fault information from the inverter.
Procedures for resetting faults, including terminal, software, and keypad methods.
Details fault codes, possible causes, and recommended measures for troubleshooting.
Information on contacting SEW service for support and repair.
General technical specifications applicable to all MOVITRAC® 31C inverters.
Technical data for MOVITRAC® 31C units in sizes 0 and 1 (230V).
Technical data for MOVITRAC® 31C units in sizes 2 and 3 (230V).
Technical data for MOVITRAC® 31C units in size 0 (400/500V).
Technical data for MOVITRAC® 31C units in size 1 (400/500V).
Technical data for MOVITRAC® 31C units in size 2 (400/500V).
Technical data for MOVITRAC® 31C units in size 3 (400/500V).
Technical data for MOVITRAC® 31C units in size 4 (400/500V).
Detailed electronic specifications and data for the MOVITRAC® 31C.
To Next Page
