Seypos PRP-300 User Manual

Save the user manual for future reference.
Thermal Receipt Printer
Instruction Manual

Seypos PRP-300 Specifications

General

Brand	Seypos
Model	PRP-300
Category	Printer
Language	English

Summary

Important Safety Notification

Product Overview

Main Features

Lists key features like compact design, auto-cutter, multi-I/O, cash drawer port.

Packing Contents

Shows and lists the components included in the printer package.

Technical Specifications

Details technical specifications like print method, speed, font, resolution, width, etc.

Part Description

Printer Views and Dimensions

Illustrates different views of the printer and shows physical dimensions with measurements.

Control Buttons and Indicators

Identifies and shows the location of control buttons and indicators.

I/O Ports and DIP Switches

Details the printer's rear view showing I/O ports and DIP switches.

Multi-I/O Ports Detail

Illustrates and names the different I/O ports (USB, RS-232, RJ-45, RJ-11, PWR) and cables.

DIP Switch Configuration

Baud Rate Setting

Explains how DIP switches 7 and 8 set the baud rate.

Installing Your Printer

Connecting Your Printer

Provides steps and an illustration for connecting the printer to a host PC.

Paper Roll Installation

Details the process of opening the cover and inserting the paper roll.

Paper Width Guide Installation

Explains how to install the paper width guide for narrower rolls.

Installing Printer Driver

Guides on installing the printer driver from the utility CD.

Printer Configuration Steps

Describes the menu for configuring the printer model.

Appendix

Cutter Maintenance

Explains how to reset and clean the printer's cutter.

RS-232 Pin Assignment

Details the pin assignments for the RS-232 serial port.

RJ-11 Pin Assignment

Details the pin assignments for the RJ-11 cash drawer port.

Self Test Procedure

Explains how to perform a self-test to print printer settings.

Virtual Serial Port Installation

Guides on installing the virtual serial port driver for USB connection.

Ethernet Connection and Configuration

Explains how to connect and configure the printer via Ethernet.

DHCP Client Connection

Details connecting the printer using DHCP for automatic IP assignment.

Acquire Printer IP Address (Fixed IP)

Explains how to get the printer's IP address via Self-Test (Fixed IP).

DHCP Client Mode Operation

Describes how the printer operates in DHCP Client mode and acquires an IP address.

IP Reconfiguration via WebConfig

Guides on accessing the Ethernet WebConfig utility to reconfigure IP settings.

Printer Status via WebConfig

Explains how to view printer status and perform print tests via WebConfig.

Configure Ethernet Interface

Details how to change the printer's IP address and configure DHCP settings.

Reboot Printer Configuration

Explains how to reboot the printer to apply new configurations.

Setup TCP/IP Printer Port

Guides on setting up the TCP/IP printer port in Windows after IP configuration.

Code Page Setup Utility

Guides on setting up the printer's code page using the utility software.

Interface and Page Code Selection

Explains selecting interface and page code for setup.