EasyManua.ls Logo

SFD NDB-1C-20TS - Assembly Instruction

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
normal operating position and they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved. Children aged from 3
years and less than 8 years shall not plug in,
regulate and clean the appliance or perform
user maintenance.
Some parts of this product can become very hot
and cause burns. Particular attention has to be
given where children and vulnerable people are
present.
25.
1. Turn the radiator upside-down on a scratch
free and stable surface to prevent damage to the
paint finish or your floor surfacing (see Fig 1).
2. Fit the wheel+baseplate assemblies onto the
radiator by placing the U-shaped bolts between
the outermost fins on each side of the radiator
(see Fig.2 - 4).
3. Securely fasten the wheel+baseplate
assemblies onto the radiator by screwing the wing
nuts onto the bolts (see Fig. 5).
IMPORTANT: Please fit the wheel+baseplate
assemblies as shown above. Other positions may
affect the stability of the unit (see Fig.6 for
correct orientation).
WARNING: Only operate the radiator in normal
upright position with wheels assemblies
attached to the bottom as shown in Fig. 6
(wheels on the bottom, controls on the top), any
other position could create a hazardous situation
If you are in any doubt about installing this
product, consult a qualified electrician.
-
Assembly Instruction