SFX EDM-8C - Profile; EDM-8 C Parameter

Profile
With the rapid development of automation equipment, high demand of
products’ precision and extensive usage of difficult-to-cut materials in
machining, tools broken into work pieces has heavily affected the defective
rate of products. The common methods of removing broken taps and drills
are smashing items by hand, screwing them out after welding, or even acid
corrosion and flame cutting, which contribute to low efficiency and damage
to work pieces.
EDM-8C
can fast remove broken taps, drill, drift
, screw, plug gauge etc.,
without damaging to the work piece, easily process on work pieces at any
size, especially effective for large machine tools. With a high efficiency in
processing, it could remove broken tap, screw and is especially good at
processing mark.
Please feel free to contact us if you got any problem in processing or
would like to share your valuable experience.
Luoyang Xincheng Precision Machinery Co., Ltd
Edition: First edition in March,2019
Print: First printing in March, 2019
Print Runs: 1-2000 copies
PORTABLE EDM MACHINE
EDM-8C Parameter
Input Voltage (V)
AC220V/110V 50Hz/60Hz
Input Power (W)
800
Output Voltage (V)
DC70V
Stepper Current
Yes
Accessories Storage
Toolkit
Working Liquid
Tap water
(Pure water / Distilled water is
better )
Electrode Chuck Diameter(mm)
0.8-10
Max Travel of Working Head (mm)
70
Short Hole Processing Speed
(Processing Material: Hardened Steel)
≈1
Electrode
Ø4
Machine Size (L*W*H mm)
380*
160*300
Work Head Size (L*W*H mm)
DK8 300×50×50
Pump Size（L*W*H mm）
60×45×55
Net Weight（kg）
16
1 2