4
Installation
Screw the bolts provided into the holes on the wall.
Attach the bracket to the bolts with screws supplied.
Hook up the water heater and nail on the fixing hole.
Unit Installation Steps
Make sure it is flat on the wall surface that you
want to install the water heater on. Install it using
the install sticker and screws provided. Space
for each side of the sticker must be at least 25cm.
Drill the wall for indicated holes. Be cautious when
using power tools near water.
Ma k e sur e no ca bl es or p ipe s hi dde n in th e wa ll.
Fi x i n g h o l e
To Next Page
Loading...