SGM Technology for lighting GB
User Manual 1.00 Genio Mobile
- 6 -
1
INTRODUCTION
1.1 Main Features
Compact, agile and able to ensure even, perfectly controllabe wash lighting generated by 16 high power
Luxeon LEDs.
All this is offered by SGM’s Genio Mobile, a reliable high-tech colour changing fixture with features that
make it ideal for applications in buildings, museums, art galleries and shopping centres.
Thanks to its motorized Pan and Tilt and to a protection rate IP65, Genio Mobile is also a practical
flexible unit, so indispensable for theatre and TV lighting professionals.
L
EDS
Genio Mobile fixtures use LED (Light Emitted Diode) technology as a light source. A series of LED points
mounted on a matrix enables to generate an evenly distributed light beam, suitable for illuminating large
areas. The three types of LED (Red, Green and Blue) that make up the matrix enable la realize and control
any colour of light beam, with perfectly balanced colour at all times.
L
ENSES
Each Genio Mobile LED is fitted with an interchangeable high efficiency lens. The lens matrices available
enable to project light beams with the following projection angles:
8 °
25 °
F
UNCTION
RGB colour mixing
Linear Dimmer
Adjustable strobe effects
Colour rainbow effect on pre-programmed Macros
Motorized Pan and Tilt movement
Pan 540°
Tilt 270°
Setting via on-board microcomputer viewable on dispaly
Adjustable display brightness
LED power reduction in the event of overheating
Elapsed time meter for each colour channel Red, Green, Blue
General fixture operating time meter
Master/Slave capabilities
C
ONTROL
S
IGNALS
DMX 512 or RS 232 input signal
Stand-alone operation with built-in programming
Independent day to day control of the on-board programs on a weekly basis
Independent operation of systems with up to 30 fixtures, via Master – Slave links
Infrared (IR) remote controlled
To Next Page
Loading...