SGM X-5 - Page 6

6
• Do not stare directly into the light.
• Never attempt to bypass the fuse. Always replace defective fuses with ones of the specied type and rating.
• Verify that the power feed cable is rated for the current draw of all connected xtures.
• Keep all combustible materials (for example fabric, wood, paper) at least 0.5 meters (20 inches) away from the
xture. Keep ammable materials well away from the xture.
• Provide a minimum clearance of 0.1 meters (4 inches) around air vents.
• Do not modify the xture or install other than genuine SGM parts.
• Do not operate the xture if the ambient air temperature (Ta) exceeds 40˚ C (104˚ F).
• Do not operate the xture near stairways.
• Provide advance notice that strobe lighting is in use.
• Avoid extended periods of continuous ashing, particularly at frequencies of 10 to 20 ashes per second.
To guard against UV radiation, burn, and re.
To guard against epileptic seizure..