SGM X-5 - Preparation for Use

7
Preparation for Use
Unpacking
• Strobe Light Fixture
• User manual
• Mains power cable
• Foot − black aluminium plate
The packing material protects the xture during shipment, please retain for future transportation of the xture.
AC Power Connection
The auto-ranging power supply automatically adjusts to AC power from 200-240 volts nominal at 50/60 Hz.
The current required by the X-5/XC-5 is 4 amps. To avoid overload, allow one 4 amp branch circuit per xture to
operate the X-5/XC-5 model at full power.
Use 2.5 mm2 (13 AWG) or larger power feed cables and keep runs as short as possible.