Why does my SGS Nail Gun jam frequently?
Your SGS Nail Gun may jam frequently due to several reasons: incorrect fasteners (verify fasteners of correct size), damaged fasteners (replace fasteners), loose magazine or nose screw (tighten screws), a dirty magazine (clean it), or a worn or damaged driver (install Driver maintenance kit).
How to fix an air leak in the trigger area of my SGS Nail Gun?
If you notice an air leak near the top of your SGS Nail Gun or in the trigger area, the issue might be due to loose screws (tighten them) or worn/damaged o-rings or seals (install overhaul kit).
Why is there an air leak near the bottom of my SGS Nail Gun?
An air leak near the bottom of your SGS Nail Gun could be caused by loose screws (tighten screws) or worn or damaged O-rings or bumper (install overhaul kit).
Essential safety rules for operating the nailer/stapler, covering personal protection, tool handling, and air supply.
Procedure for using the safety mechanism, including operation and checking its functionality.
Instructions for loading fasteners and operating the tool, including air pressure adjustment.
Guidelines for applying oil to the tool for optimal performance and longevity, including oiler/filter use.
Diagram and explanation for correctly connecting the air supply, regulator, and oiler.
Visual representation of all parts of the nailer and stapler.
Detailed list of all components with corresponding numbers for identification.
Information on when to seek professional servicing and warnings against self-repair.
Details common symptoms like leaks or jams and their corresponding solutions.
Information regarding CE marking and compliance with European directives.
Details about SGS Engineering's commitment to quality and ISO 9001 certification.
Essential safety rules for operating the nailer/stapler, covering personal protection, tool handling, and air supply.
Procedure for using the safety mechanism, including operation and checking its functionality.
Instructions for loading fasteners and operating the tool, including air pressure adjustment.
Guidelines for applying oil to the tool for optimal performance and longevity, including oiler/filter use.
Diagram and explanation for correctly connecting the air supply, regulator, and oiler.
Visual representation of all parts of the nailer and stapler.
Detailed list of all components with corresponding numbers for identification.
Information on when to seek professional servicing and warnings against self-repair.
Details common symptoms like leaks or jams and their corresponding solutions.
Information regarding CE marking and compliance with European directives.
Details about SGS Engineering's commitment to quality and ISO 9001 certification.
To Next Page
General