SAFETY INSTRUCTIONS
Please read these instructions carefully. Note the safety
Instructions and warnings. Use the product correctly and with care for the pur-
pose of which it is intended. Failure to do so may cause damage to property
and/or serious personal
Injury. Please keep this instruction manual safe for future use.
We’ve done all we can to ensure this press offers the utmost in safety but
you have to do your part. No amount of warning can take the place of good
judgement, so make sure it’s the first thing you bring to any job. Beyond that
here are some tips:
Steel and other materials can shatter. Always use protective eye-wear, a full-
face impact safety shield and heavy duty work gloves that comply with the
appropriate ansi code.
If you detect anything that may indicate imminent structural failure stop using
the press immediately and inspect it
Thoroughly.
Bolt the press to the floor if it is to be used on bulky or
Unstable items.
Do not use the press to compress springs or any other item that could disen-
gage and cause a potential
Hazard.
Use a qualified person to maintain the press in good
Condition. Keep it clean for safe and optimum performance.
Do not exceed the rated capacity. Never apply excessive force to a work
piece and always use the pressure gauge to accurately determine the ap-
plied load.
SPECIFICATION
MAX CAPACITY 50 TON
STROKE 200MM
WORK RANGE 68-920MM
WEIGHT 293kg
WWW.SGS-ENGINEERING.COM PAGE 2
To Next Page
Loading...
