EasyManua.ls Logo

SGS TJ3 - SPECIFICATION; INSPECTION; Pre-Use Inspection; Post-Abnormal Load Inspection

SGS TJ3
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE 2
OPERATION
The owner is responsible for maintaining all decals and warning labels
and maintaining the unit in good working order. Safety information
should be emphasised and understood prior to usage. This jack shall
be inspected as per the instruction manual before each use.
It is the owner’s/operators’ responsibility to study all warnings, operat-
ing and maintenance instructions contained on the product label and
within this instruction manual to ensure proper operation of this jack.
The owner/operator shall retain these product instructions for future
reference.
This jack shall be maintained in accordance with the product instruc-
tions. No alterations shall be made to this jack.
INSPECTION
Before each use a visual inspection shall be made for abnormal
conditions such as cracked welds, damaged, bent, worn, loose or
missing parts.
This jack should be inspected immediately if it is believed to have been
subjected to an abnormal load or shock. Owner/operators should be
aware that repair of this jack requires specialised equipment and
knowledge.
SPECIFICATION
MAX CAPACITY 3 TONNE
RETRACTED HEIGHT 145MM
FULLY EXTENDED 520MM
WWW.SGS-ENGINEERING.COM

Related product manuals