ShadeLogic 14553 User Manual

05-14553-0APage 1
ShadeLogic
™
Quick Clamp Canopy Tilt-Mount
™
Table Top Pop Up
Assembly Instructions
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
1-800-524-9970
1-800-559-6175
Canada:
12/07/09
DESCRIPTION MODEL #
7'4" x 10' Quick Clamp Canopy
™
14553
Before you start: 2+ individual recommended for assembly, approximate time 15 min.
Please read instructions COMPLETELY before assembly.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.
FITS ANY TABLE UP TO 10'
Table NoT INcluded
WARNING
KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THIS TENT FABRIC
This canopy meets the ammability requirements
of CPAI-84. It is not re proof. The fabric may
burn if left in continuous contact with any ame
source. The application of any foreign substance
to the tent fabric may render the ame resistant
properties ineffective.

ShadeLogic 14553 Specifications

General

Brand	ShadeLogic
Model	14553
Category	Tent
Language	English

Summary

Important Information and Safety Precautions

Pre-Assembly Recommendations

Recommends 2+ individuals for assembly with an approximate time of 15 minutes.

Flammability Warning

Keeps flame and heat sources away from tent fabric due to flammability requirements.

General Safety Guidelines

Covers DANGER (electrical wires, structures), WARNING (fire, open flame), and CAUTION (anchoring).

Care and Cleaning Instructions

Details on removing water/snow and cleaning fabric cover with mild soap, avoiding harsh tools.

Product Warranty Information

Outlines a 1-year limited warranty for cover fabric, end panels, and framework.

Assembly Steps

Attach Quick Clamp Brackets

Attaching one quick clamp bracket on each side of the table.

Insert Frame Uprights

Inserting the frame uprights into the quick clamp brackets.

Attach Top Cross Rail

Connecting the top cross rail to the frame uprights.

Insert Bottom Cross Rails

Connecting the bottom cross rails to the frame.

Pull Cover Over Frame and Secure

Draping the cover over the frame and fastening corners and top rail.

Lift Cover Arms to Upright Position

Extending frame, inserting side poles into cover pockets for a tight fit.

Adjusting Your Tilt-Mount Canopy

Adjusting Base Angle

How to lift the handle to release the upright and move it to the desired position.

Adjusting Canopy Height

How to push the pop-pin and slide the upright to the desired height.