EasyManua.ls Logo

Shanghai High-Flying Electronics Technology Co. HF-LPT120 User Manual

Shanghai High-Flying Electronics Technology Co. HF-LPT120
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
High-Flying
HF-LPT120 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 1 -
HF-LPT120
Low Power WiFi Module User Manual
V 1.1.1
Overview of Characteristic
Support IEEE802.11b/g/n Wireless Standards
Based on Self-developed High Cost Effective SOC
Support UART/GPIO Data Communication Interface
Support Work As STA/AP Mode
Support Smart Link Function (APP program provide)
Support Wireless and Remote Firmware Upgrade Function
support WPS Function
Support External I-PEX or Internal PCB Antenna Option
Single +3.3V Power Supply
Smallest Size: 22mm x 13.5mm x 6mm, 1x10 2mm Connector
FCC/CE Certificated

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Shanghai High-Flying Electronics Technology Co. HF-LPT120 and is the answer not in the manual?

Shanghai High-Flying Electronics Technology Co. HF-LPT120 Specifications

General IconGeneral
ModelHF-LPT120
CategoryNetwork Card
ManufacturerShanghai High-Flying Electronics Technology Co.
Interface TypeUART
Wireless Standards802.11b/g/n
Frequency Range2.4 GHz
Operating Voltage3.3V
Data Transfer RateUp to 150 Mbps
SecurityWEP, WPA, WPA2
AntennaExternal

Summary

4. AT+INSTRUCTION INTRODUCTION

4.1. Configuration Mode

Explains how to enter configuration mode for module setup and control.

4.2. AT+ Instruction Set Overview

Introduces the comprehensive set of AT commands for controlling module functions.

1. PRODUCT OVERVIEW

1.1. General Description

Provides a general overview of the HF-LPT120 module's features and capabilities.

2. FUNCTIONAL DESCRIPTION

2.1. Wireless Networking

Explains the module's capability to operate as both a wireless Access Point (AP) and a Station (STA).

2.2. Work Mode: Transparent Transmission Mode

Details the transparent transmission mode for serial data over Wi-Fi.

2.5. Parameters Configuration

Explains the methods for configuring module parameters via web or AT commands.

2.6. Firmware Update

Details the procedures for updating the module's firmware.

3. OPERATION GUIDELINE

5. PACKAGE INFORMATION