Shanghai High-Flying Electronics HF-SH01 User Manual

High-Flying
Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 1 -
Low Power WiFi Module User Manual
V 1.3
Overview of Characteristic
 Support IEEE802.11b/g/n Wireless Standards
 Based on Self-developed High Cost Effective MCU
 Ultra-Low-Power for Battery Applications with Excellent Power Save Scheme
 Support UART/SPI/PWM/GPIO Data Communication Interface
 Support Work As STA/AP/AP+STA Mode
 Support Smart Link Function (APP program provide)
 Support Wireless and Remote Firmware Upgrade Function
 Support WPS Function
 Support Multi-TCP Link (5 Channel) Apllication
 Support Soft Key Power Control
 Support Internal/External Antenna Option
 Single +3.3V Power Supply
 Smallest Size: 23.1mm x 32.8mm x2.7mm
 FCC/CE Certificated
HF-SH01
HF-SH01

Shanghai High-Flying Electronics HF-SH01 Specifications

General

Brand	Shanghai High-Flying Electronics
Model	HF-SH01
Category	Network Card
Language	English

Summary

Overview of Characteristic

Product Overview

General Description

Provides a general overview of the module's capabilities and features.

Hardware Introduction

Details the module's hardware, including pins, electrical specs, and physical size.

Functional Description

Wireless Networking

Explains STA, AP, and AP+STA modes for network connectivity.

Work Mode & Data Handling

Covers transparent transmission mode and UART frame schemes for data transfer.

Configuration & Update

Details parameter configuration and firmware update procedures.

Operation Guideline

Configuration via Web Accessing

Guides users on configuring the module through its web interface.

AT+INSTRUCTION INTRODUCTION

AT+ Instruction Set Overview

Details the syntax and list of AT commands for module control.

Package Information

Recommended Reflow Profile

Specifies temperature profiles for safe soldering of the module.

Device Handling Instruction

Provides guidelines for safe handling, storage, and soldering of the module.

Appendix A: HW Reference Design

Appendix B: Control GPIO/PWM Function with Network Commands

Network Command

Explains how to control GPIO and PWM pins using network commands.

Hexadecimal Network Command

Details commands for reading/writing module status using hexadecimal data.

Appendix C: HTTP Protocol Transfer

HTTP AT command

Describes AT commands for configuring and using HTTP protocol.

Appendix D: Contact Information