Need help?Do you have a question about the Shanling UA3 and is the answer not in the manual?
General| Frequency Response | 20Hz-40kHz |
|---|---|
| MQA Support | No |
| Connector | USB-C |
| Charging Interface | USB-C |
| DAC Chip | ES9219C |
| PCM Support | Up to 32-bit/384kHz |
| DSD Support | DSD512 |
| Headphone Output | 3.5mm |
Prohibits unauthorized repair, disassembly, or modification of the device.
Advises against using the device in extreme environments and avoiding contact with liquids.
Recommends safe volume levels and lowering volume before connecting headphones.
Warns against chemical cleaners to prevent damage to the device's surface and coating.
Details plug-and-play compatibility and driver requirements for various operating systems.
Switch to UAC1.0 mode for compatibility with gaming consoles or older Android devices.
Device is USB-powered; slight warmth during use is normal and does not affect performance.
Specifies the need for a USB-C to Lightning cable for iOS device connectivity.
Activate UAC1.0 mode by pressing the button while connecting the device.
Control hardware volume (2s press) and media playback (single press).
Adjusts connected device's software volume or DAC hardware volume.
Map sampling frequencies to specific LED indicator colors for playback status.
Detailed performance metrics for the 3.5mm output: power, frequency response, THD+N, dynamic range, separation, impedance.
Detailed performance metrics for the 4.4mm balanced output: power, frequency response, THD+N, dynamic range, separation, impedance.
Physical specifications including device size (60 x 25 x 13mm) and weight (approx. 20.5g).
To Next Page
