To Next PageTo Next Page
Need help?Do you have a question about the Shape ICON Series and is the answer not in the manual?
General| Brand | Shape |
|---|---|
| Model | ICON Series |
| Category | Professional Video Accessories |
| Language | English |
Wooden handle grips included with specific ICON series models like W-ICON1, W-ICON2, W-ICON2A, W-ICON2V.
Battery plate for Anton Bauer batteries, compatible with ICON2A, ICON3A, W-ICON2A models.
Battery plate for V-mount batteries, compatible with ICON2V, ICON3V, W-ICON2V models.
Perforated plate with mounting holes, not included with ICON1 or W-ICON1.
Handles with standard ARRI rosette, compatible with ICON1, ICON2, ICON2A, ICON2V.
Accessory for mounting, includes rubber plug and 15mm Rodbloc.
Support strap for specific ICON series models like ICON2, ICON2A, ICON2V, W-ICON2, W-ICON2A, W-ICON2V.
Describes how the system can be mounted on 15mm rods using the RODBLOC SPIGOT 750.
Explains that the ICONBODY can be mounted on a standard SPIGOT 750 Gobo stand (C-stand).
Highlights the SHAPE handles with ARRI rosette and push-button for easy 360-degree rotation.
Features an adjustable universal bracket compatible with most monitors with a bottom threaded hole.
Notes that a wireless data receiver can be added for a cable-free solution.
Describes a tension system for forward/rearward movement of the monitor bracket and cheeseplate.
Highlights availability of wooden handle grips made from Canadian Maple.
Explains how the system can be combined with a strap for enhanced comfort and support.
Details cheeseplate threaded holes for easy attachment of receivers, V-mount, or Anton Bauer plates.
Describes how handles and a rubber plug provide stable 3-point support when placed on a table.
States that entire SHAPE monitor cage solutions can be added using the lower screw.
Explains the SHAPE red push button allows for easy tilting of the unit forward and backward.
