Why is my Shark CORDLESS Vacuum Cleaner not picking up?
Your Shark CORDLESS Vacuum Cleaner might not be picking up due to several reasons: * The dust cup container is full. Empty the dust cup container. * The dust cup filter needs cleaning or replacement. Remove the dust cup filter and check for any obstructions in the air duct. Clean or replace the dust cup filter. * The unit needs recharging. Charge the unit.
What to do if my Shark CORDLESS hand vacuum will not operate?
If your Shark CORDLESS hand vacuum won't operate, consider these potential causes: 1. The batteries are discharged. Charge the unit. 2. The battery is dead (it won't hold a charge). Replace the batteries. 3. The contacts between the unit and the charging stand are dirty. Wipe and clean any dirt from the contacts. 4. There's no power in the electrical outlet supplying the transformer. Check the fuse or breaker and replace the fuse or reset the breaker.
Why is dust escaping from my Shark CORDLESS hand vacuum?
Dust might be escaping from your Shark CORDLESS hand vacuum for these reasons: * The dust cup container is full. Empty the dust cup container. * The dust cup filter is not installed correctly. Review the dust cup filter installation instructions. * There's a puncture or hole in the dust cup filter. Replace the dust cup filter.
How to fix a Shark CORDLESS Vacuum Cleaner when the motorized brush will not work?
If the motorized brush on your Shark CORDLESS Vacuum Cleaner isn't working, check the following: * Ensure the 2 metal pins of the motorized brush are in contact with the vacuum cleaner. Firmly insert the motorized brush into the air-intake nozzle to connect the motorized nozzle to the unit's power supply. * The motorized brush may be clogged. Remove any lint, hair, or other debris from the motorized brush.
General| Brand | Shark CORDLESS |
|---|---|
| Model | SV748 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
