Shark D-SKWAL 3 User Manual

5
C
D
ENGLISH
CHOOSING THE RIGHT SIZE
3. With the chinstrap ghtened, grab
the back of the helmet by the base
and try to pull it o your head in a
twisng moon.
Then try to remove the helmet by
grasping it by the base of the chin
guard.
This must be done vigorously. If the
helmet starts to come o, the chosen
helmet is too big. In this case, try a
smaller size.
4. Tilt your head forwards as far as
possible. The base of the chin guard
should not touch your chest.
See Fig. C.
5. Tilt your head backwards as far
as possible. The base of the helmet
should not touch your back.
See Fig. D.
Hair must not be rolled or ed up in-
side the helmet. Do not put anything
in/on your hair inside the helmet. Do
not add anything to the interior of the
helmet to adjust its posion on your
head.
If you have any quesons about how
to choose the right helmet size, ask
your retailer for advice. Each of these
steps must be repeated throughout
the helmet’s life, as comfort foams
can change over me. If the helmet
no longer ts properly during its life,
it should be replaced.
 WARNING! Never lend your
helmet to someone else without
ensuring that it ts that person, by
following the instrucons in this
manual.
 WARNING! If you nd the
helmet does not t perfectly aer
following these instrucons, DO
NOT USE IT. In such a case, choose
a dierent size or model.

Shark D-SKWAL 3 Specifications

General

Brand	Shark
Model	D-SKWAL 3
Category	Motorcycle Accessories
Language	English