Shark DUOCLEAN HZ400UKT

To Next Page

HZ400UK_Series_QSG_MP_190611_Mv1

Please be sure to read the enclosed Shark

instructions prior to using your unit.

Lift-Away

Pod

Wand

Floor Nozzle

Accessory Holder

20cm Crevice Tool

Dusting Brush

Pet Turbo Brush

(Certain Models Only)

ASS E MBLY

TIPS

EMPTYING THE DUST CUP

BRUSHROLL MAINTENANCE

Empty the dust cup after each use.

MAINTENANCE:

Rinse pre-motor ﬁlters

every month and HEPA

ﬁlter once a year.

Rinse with cold water

only. Allow ﬁlters to

air-dry completely

before reinstalling.

See enclosed

Instructions for more

information on how

to clean and replace

the ﬁlters.

Attach the accessory holder

(D) onto the wand and place

accessories on the holder.

Lift the ﬂoor nozzle tube, pushing it ﬁrmly

until it stands upright, then insert the wand

into the tube.

Brushroll access

The self-cleaning brushroll

automatically removes hair

wrap. If some hair or debris

remains after continued

use, remove the cover to

access the brushroll. Use

a coin to turn the locks

counterclockwise, then lift

off the cover. Remove any

debris or hair wrap and

clear the debris intake.

To close, push down the

cover until it clicks into

place, then turn the locks

clockwise.

Soft Roller

Slide the button on the ﬂoor

nozzle to eject the Soft Roller.

Tap off debris and wipe the

roller clean with a dry towel.

clean

QUICK START GUIDE

When storing, wrap cord

around cord hooks.

For quick cord access,

rotate upper hook down

and remove cord.

When the vacuum is placed

in the upright position,

the retractable wheels will

extend so the vacuum

can stand up on its own.

NOTE: For proper operation, ensure all parts

are ﬁrmly CLICKED into place.

(Click)

(Snap)

DUOCLEAN

CORDED STICK VACUUM

WITH ANTI HAIR WRAP TECHNOLOGY

D E F

Need help?

Do you have a question about the Shark DUOCLEAN HZ400UKT and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications (Inferred from the document)
Usage Features
Assembly
Storage Tips
Versatile Cleaning Configurations
Maintenance Features
Emptying the Dust Cup
Filter Maintenance
Brushroll Maintenance
Contact Information
Copyright Information

This document is a Quick Start Guide for the Shark DUOCLEAN® Corded Stick Vacuum with Anti Hair Wrap Technology, model HZ400UK_Series. It provides essential information on assembly, usage, and maintenance of the vacuum cleaner.

Function Description:

The Shark DUOCLEAN® Corded Stick Vacuum is designed for versatile floor-to-ceiling cleaning. It features DUOCLEAN® technology, which typically combines a soft roller and a bristle brushroll in one nozzle to effectively clean both hard floors and carpets. The "Anti Hair Wrap Technology" is a key feature, designed to automatically remove hair from the brushroll, minimizing manual intervention. The vacuum can be used in multiple configurations: as an upright vacuum for general floor cleaning, with the wand for extended reach above-floor, and as a Lift-Away® pod with a hose for portable cleaning.

Important Technical Specifications (Inferred from the document):

Model: HZ400UK_Series
Technology: DUOCLEAN®, Anti Hair Wrap Technology
Power Source: Corded (implied by "Corded Stick Vacuum")
Filter Type: Pre-motor filters and HEPA filter (requires rinsing)
Dust Cup Capacity: Not specified, but designed for regular emptying.

Usage Features:

Assembly:

The vacuum consists of several main components:

A Lift-Away® Pod (A)
A Wand (B)
A Floor Nozzle (C)
An Accessory Holder (D)
Accessories: 20cm Crevice Tool (E), Dusting Brush (F), Pet Turbo Brush (G - certain models only).

Assembly steps:

Attach the accessory holder (D) onto the wand and place accessories on the holder. This clicks into place.
Lift the floor nozzle tube, pushing it firmly until it stands upright.
Insert the wand (B) into the floor nozzle tube (C). This also clicks into place.

Important Note: For proper operation, ensure all parts are firmly CLICKED into place.

Storage Tips:

When storing, wrap the power cord around the designated cord hooks.
For quick cord access, rotate the upper hook down and remove the cord.
When the vacuum is placed in the upright position, retractable wheels extend, allowing the vacuum to stand up on its own.

Versatile Cleaning Configurations:

Upright Mode:
- For general floor cleaning.
- Step on the footprint icon on the floor nozzle and tilt the handle back.
- Press the power button on the back of the handle to operate.
Above-Floor with Wand:
- For extended reach cleaning.
- Detach the wand by stepping on the wand release pedal and lifting the handle.
- Add an accessory to the end of the wand for specific cleaning tasks.
Wand with Extended Hose:
- For even more flexibility with the wand.
- Slide the hose cuff down to extend the integrated hose.
- Note: When finished, slide the hose cuff back into place before reattaching the wand to the pod.
Lift-Away® Pod with Hose:
- For portable cleaning.
- Detach the Lift-Away pod by pressing the Pod Release button.
- Attach an accessory directly to the pod for close-up cleaning or slide the cuff down to extend the hose for added flexibility.
- Note: During reassembly, ensure the hose is clicked securely into place before attaching the wand.

Maintenance Features:

Emptying the Dust Cup:

Empty the dust cup after each use.
The document shows an "empty" and "clean" indicator, suggesting visual cues for when to empty. A "release" mechanism is indicated for detaching the dust cup.

Filter Maintenance:

Pre-motor filters: Rinse every month.
HEPA filter: Rinse once a year.
Rinsing instructions: Use cold water only. Allow filters to air-dry completely before reinstalling.
Note: Refer to the enclosed instructions for more information on how to clean and replace the filters.

Brushroll Maintenance:

Brushroll Access: The self-cleaning brushroll automatically removes hair wrap.
If hair or debris remains after continued use:
1. Remove the cover to access the brushroll.
2. Use a coin to turn the locks counterclockwise.
3. Lift off the cover.
4. Remove any debris or hair wrap and clear the debris intake.
5. To close, push down the cover until it clicks into place, then turn the locks clockwise.
Soft Roller Maintenance:
1. Slide the button on the floor nozzle to eject the Soft Roller.
2. Tap off debris and wipe the roller clean with a dry towel.

Contact Information:

For questions or to register the product, customers can contact SharkNinja at 0800 862 0453 or visit sharkclean.eu. Social media channels are also provided: @sharkcleaninguk (Facebook and Instagram) and @sharkcleanuk (Twitter/X).