EasyManua.ls Logo

Shark FLEX DuoClean HV394Q Series User Manual

Shark FLEX DuoClean HV394Q Series
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HV394Q
For questions or to register your product, contact us at
800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
Please make sure to read the enclosed Shark® Owners Guide prior to using your unit.
©2017 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
DUOCLEAN, MULTIFLEX, and SHARKFLEX are trademarks of SharkNinja Operating LLC.
MULTIFLEX STORAGEMULTIFLEX™ REACH
MultiFLEX
Lock Release
MultiFLEX
Lock Release
Carry
Handle
Looking at the vacuum from the side
with the cord hooks, wrap the power
cord counterclockwise around the
hooks, starting under the bottom hook.
Then press the MultiFLEX Wand Lock
Release button and gently fold the
handheld vacuum forward toward the
floor nozzle. Use the handle to carry
the vacuum to its storage location.
To take the vacuum out of storage
mode, unwind the cord, then press the
MultiFLEX Lock Release button while
lifting up the handheld vacuum. The
wand will lock in place.
Easily access hard-to-reach areas under
furniture. Press the MultiFLEX Lock
Release button to lower the angle of the
wand to increase your reach.
Question and Answer IconNeed help?

Do you have a question about the Shark FLEX DuoClean HV394Q Series and is the answer not in the manual?

Shark FLEX DuoClean HV394Q Series Specifications

General IconGeneral
BrandShark
ModelFLEX DuoClean HV394Q Series
CategoryVacuum Cleaner
LanguageEnglish

Summary

Multiflex Reach and Storage

Multiflex Reach

Press the MultiFLEX Lock Release button to lower the wand's angle for extended reach under furniture.

Multiflex Storage

Wrap cord, press MultiFLEX Wand Lock Release, fold handheld towards floor nozzle for storage.

Assembly

Connecting the Wand to the Floor Nozzle

Connect the MultiFLEX Wand (C) to the Motorized Floor Nozzle (B) by aligning and clicking them together.

Connecting the Handheld Vacuum to the Wand

Attach the Handheld Vacuum (A) to the MultiFLEX Wand (C) by aligning and clicking them into place.

Versatile Floor-to-Ceiling Cleaning

Floor Cleaning

Plug in the vacuum and choose the appropriate speed setting for floor cleaning.

Above-Floor Cleaning

Disconnect the wand from the floor nozzle or handheld vacuum for above-floor cleaning.

Related product manuals