-
-
-
-
PUTTING ON THE HELMET
Evoline helmets may be positioned on the head
in either the Integral or Jet position.
In either instance, once the chin strap is
released, you have to take hold of the two
sections by the buckles and hold them slightly
apart to facilitate the passage of your head.
While carrying out this movement, you are
advised to keep the two sections of the chin
strap apart with your thumbs so that they are
properly positioned.
Position the protective parts of the chin strap
buckle correctly and fasten it in accordance
with the recommendations that are appropriate
to the versions and country (see pages 22
to 29).
Check that the tension and therefore the posi-
tioning of the helmet are correct for all posi-
tions. If this is not the case, you must continue
to adjust the length until you achieve the ideal
positioning.
REMOVING THE HELMET
Release the chin strap; hold the two sections
slightly apart as for putting the helmet on and
remove the helmet.
-
-
-
12
To Next Page
Loading...
