ÉCRAN
•
VISOR
•
VISIERS
•
VISIERA
•
for the excellence of its optical qualities
and its high quality performance in resisting
shocks. Your visor is certified Total Vision.
Its external surface is treated to give high
resistance to scratches. The specific treat-
ment applied to its internal surface limits as
far as possible the risk of misting.
In order to prolong the life of these two
treatments as far as possible, you have to
look after your visor carefully.
When you clean your visor, leave it to soak
in tepid water (less than 40 degrees) and
use a soft cloth (100% cotton that does not
pill) to dry it. A little “neutral” soap (like
household soap) may help you to clean it.
WARNING: do not use window cleaning
type products (based on alcohol or other
types of solvent) as these products may
damage the visor’s treatments.
The anti-scratch and antifog treatments
are active and their action may vary under
atmospheric conditions and under heavy
rain. Under difficult conditions, surface
treatments take time to recover their effecti-
veness; we therefore advise you to put your
helmet or the visor in a dry, well ventilated
place so that it recovers its effectiveness.
In either the Integral or Jet position, the
visor is adjusted using the catch on the
upper central part of the visor.
In the Integral configuration, you have the
possibility of riding with the visor slightly
open (Figs. A – B);
Because of its original axis of rotation,
the visor remains close to the crown, thus
avoiding excessive aerodynamic resistance
in the open position.
-
-
Total Vision
-
-
-
-
31
To Next Page
Loading...
