Shark Navigator Lift-Away NV350 Series User Manual

Shark Navigator Lift-Away NV350 Series

9 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Navigator

®

sharkclean.com

Lift-Away

®

Upright Vacuum

NV350 Series

OWNER’S GUIDE

Table of Contents

Other manuals for Shark Navigator Lift-Away NV350 Series

Owner's Manual9 pages

Questions and Answers:

P
pattersonamyJul 27, 2025
What to do if my Shark Navigator Lift-Away NV350 turns off on its own?
- D
  Devon GrayJul 28, 2025
  Your Shark Vacuum Cleaner is equipped with a motor protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. To restart the thermostat: 1. Turn the vacuum off and unplug it. 2. Empty the dust cup and clean the filters. 3. Check for blockages in the hose, accessories, and inlet openings. 4. Allow the unit to cool for a minimum of 45 minutes. 5. Plug in the vacuum and restart it by moving the selector switch to Setting I (Bare Floor).
J
Jon DavisAug 2, 2025
Why is my Shark Vacuum Cleaner not picking up dirt?
- M
  Michelle RushAug 2, 2025
  If your Shark Vacuum Cleaner isn't picking up dirt, it might be due to a few reasons. First, check the filters to see if they need cleaning, follow the instructions for rinsing and drying them before putting them back. Also, the dust cup might be full, so empty it. Finally, check the hose and its connections for any blockages and clear them if needed. If the dust cup is empty and the attachment inlets are clear, check for other blockages.
B
brittney83Aug 8, 2025
How to fix a Shark Vacuum Cleaner brushroll that does not spin?
- A
  Angela GrantAug 8, 2025
  If the brushroll on your Shark Vacuum Cleaner isn't spinning, immediately turn off and unplug the vacuum. Disconnect the nozzle and remove any blockages before reconnecting and turning the vacuum back on. Step lightly on the floor or nozzle and tilt the handle back to engage the brushroll. Also, make sure the selector switch is set to Setting II (Brushroll On).
B
bwilkersonAug 15, 2025
Why is the airflow restricted in my Shark Navigator Lift-Away NV350 Vacuum Cleaner?
- S
  Sharon SchneiderAug 15, 2025
  Restricted airflow in your Shark Vacuum Cleaner can be due to several factors. Make sure to check the filters and clean them if necessary, following the rinsing and drying instructions. A full dust cup can also cause this issue, so empty it. Additionally, inspect the hose, hose connections, nozzles, and accessories for any blockages and clear them. You can also rotate the suction release collar on the handle clockwise to increase suction power. If the dust cup is empty, and the attachment inlets are clear, check for other blockages.
M
Melissa GutierrezAug 21, 2025
What to do if Shark Navigator Lift-Away NV350 lifts area rugs?
- B
  Brandon RobbinsAug 21, 2025
  If your Shark Vacuum Cleaner lifts area rugs, especially lightweight or movable ones, it's likely due to the powerful suction. Be careful when vacuuming area rugs or rugs with delicately sewn edges. Try rotating the suction release collar on the handle counterclockwise to decrease suction power. You can also move the selector switch to Setting I (Bare Floor) to disengage the brushroll.

Shark Navigator Lift-Away NV350 Series Specifications

General

Type	Upright
Model	NV350
Weight	12.5 lbs
Cord Length	25 feet
Dust Cup Capacity	1.2 dry quarts
Lift-Away Technology	Yes
Warranty	5 years
Filtration	HEPA
Accessories	Crevice tool, dusting brush, upholstery tool
Features	Swivel Steering

Summary

Important Safety Instructions

Critical Safety Warnings

Provides critical warnings to reduce the risk of fire, electric shock, or injury.

Usage Warnings and Precautions

Lists important usage warnings and precautions for operating the vacuum cleaner.

Save These Instructions

Directs users to read all instructions before operating the vacuum cleaner.

Assembling Your Vacuum

Advanced Cleaning Modes

Lift-Away Mode Use

Above-Floor Cleaning Use

Storage and Maintenance

Emptying the Dust Cup

Cleaning Pre-Motor Filters

Instructions for removing, rinsing, and drying pre-motor filters.

Maintenance Procedures

Cleaning the Post-Motor HEPA Filter

Instructions for removing, rinsing, and air-drying the post-motor HEPA filter.

Cleaning the Brushroll

Guidance on cleaning the brushroll, including removing blockages and cutting debris.

Cleaning the Pet Power Brush

Checking for Blockages

Identifies areas to check for blockages to prevent overheating and loss of suction.

Hose and Connections

Motorized Floor Nozzle

Troubleshooting and Warranty

Troubleshooting Guide

Lists common problems, their possible reasons, and solutions for the vacuum cleaner.

Five (5) Year Limited Warranty

Details the terms, coverage, exclusions, and service process for the product's limited warranty.

Getting Service

Initiating a Warranty Claim

Related product manuals

Shark Navigator Lift-Away NV352

Shark Navigator Lift-Away NV351

Preview: Navigator Lift-Away NV351 26

Navigator Lift-Away NV351 26

Navigator Lift-Away NV352 26

Preview: Navigator Lift-Away NV355 Series

Navigator Lift-Away NV355 Series

Preview: Navigator Lift-Away NV380 Series

Navigator Lift-Away NV380 Series

Preview: Navigator Lift-Away DELUXE NV360 Series

Navigator Lift-Away DELUXE NV360 Series

Preview: Navigator Powered Lift-Away NV580 Series

Navigator Powered Lift-Away NV580 Series

Preview: Shark Navigator Lift-Away UV650

Shark Navigator Lift-Away UV650

Preview: Navigator Lift-Away ZU503AMZ

Navigator Lift-Away ZU503AMZ

Preview: Navigator Lift-Away DLX UV440

Navigator Lift-Away DLX UV440

Preview: Navigator Lift-Away Zero-M Speed ZU560

Navigator Lift-Away Zero-M Speed ZU560