Shark Navigator Lift-Away NV352 User Manual

9 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Navigator

®

sharkclean.com

Lift-Away

®

Upright Vacuum

NV350 Series

OWNER’S GUIDE

Table of Contents

Other manuals for Shark Navigator Lift-Away NV352

Owner's Manual9 pages

Questions and Answers:

M
Michael Browning MDAug 9, 2025
What to do if my Shark Vacuum Cleaner turns off on its own?
- K
  Kimberly OliverAug 9, 2025
  Your Shark Vacuum Cleaner is equipped with a motor protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. To restart the thermostat: 1. Turn the vacuum off and unplug it. 2. Empty the dust cup and clean the filters. 3. Check for blockages in the hose, accessories, and inlet openings. 4. Allow the unit to cool for a minimum of 45 minutes. 5. Plug in the vacuum and restart it by moving the selector switch to Setting I (Bare Floor).
D
Dr. Jeffrey MayerAug 14, 2025
Why is my Shark Vacuum Cleaner not picking up dirt?
- P
  parkjessicaAug 15, 2025
  If your Shark Vacuum Cleaner isn't picking up dirt, it might be due to a few reasons. First, check the filters to see if they need cleaning, follow the instructions for rinsing and drying them before putting them back. Also, the dust cup might be full, so empty it. Finally, check the hose and its connections for any blockages and clear them if needed. If the dust cup is empty and the attachment inlets are clear, check for other blockages.
M
Michelle BakerAug 21, 2025
How to fix a Shark Navigator Lift-Away NV352 brushroll that does not spin?
- B
  Bethany AlexanderAug 21, 2025
  If the brushroll on your Shark Vacuum Cleaner isn't spinning, immediately turn off and unplug the vacuum. Disconnect the nozzle and remove any blockages before reconnecting and turning the vacuum back on. Step lightly on the floor or nozzle and tilt the handle back to engage the brushroll. Also, make sure the selector switch is set to Setting II (Brushroll On).
B
Brandon HolmesAug 27, 2025
Why is the airflow restricted in my Shark Navigator Lift-Away NV352?
- A
  Angela DouglasAug 27, 2025
  Restricted airflow in your Shark Vacuum Cleaner can be due to several factors. Make sure to check the filters and clean them if necessary, following the rinsing and drying instructions. A full dust cup can also cause this issue, so empty it. Additionally, inspect the hose, hose connections, nozzles, and accessories for any blockages and clear them. You can also rotate the suction release collar on the handle clockwise to increase suction power. If the dust cup is empty, and the attachment inlets are clear, check for other blockages.
J
Jennifer HaleSep 2, 2025
What to do if Shark Navigator Lift-Away NV352 Vacuum Cleaner lifts area rugs?
- M
  Michael BradfordSep 2, 2025
  If your Shark Vacuum Cleaner lifts area rugs, especially lightweight or movable ones, it's likely due to the powerful suction. Be careful when vacuuming area rugs or rugs with delicately sewn edges. Try rotating the suction release collar on the handle counterclockwise to decrease suction power. You can also move the selector switch to Setting I (Bare Floor) to disengage the brushroll.

Shark Navigator Lift-Away NV352 Specifications

General

Type	Upright
Weight	12.5 lbs
Dust Cup Capacity	1.2 dry quarts
Filtration	HEPA filter
Cord Length	25 feet
Power	1200 watts
Lift-Away Feature	Yes
Power Source	Corded Electric
Special Features	Swivel Steering
Included Tools	Crevice Tool, Dusting Brush

Summary

Important Safety Instructions

WARNING: Fire, Electric Shock, or Injury Risks

Essential precautions to reduce risks of fire, electric shock, or injury during appliance use.

General Use Warnings

Important warnings for safe operation, including child supervision and handling.

Save These Instructions

Getting Started

Operating Modes

Upright Mode

Standard upright operation for floors and carpets.

Lift-Away Mode

Detachable pod for cleaning hard-to-reach areas above the floor.

Vacuum Assembly

Step-by-Step Assembly

Lift-Away Mode Operation

Detaching the Pod and Handle

Maintenance Schedule

Emptying the Dust Cup

Cleaning the Pre-Motor Filters

Cleaning the Brushroll

Cleaning the Post-Motor HEPA Filter

Blockage Checking and Hose Connections

Checking for Blockages

Guide to identifying and clearing potential blockages in the vacuum.

Hose and Connections to Vacuum

Motorized Floor Nozzle

Troubleshooting Guide

Five (5) Year Limited Warranty

What is Covered by this Warranty?

What is Not Covered by this Warranty?

How to Get Service

Information on obtaining product support and warranty service options.

How to Initiate a Warranty Claim

Related product manuals

Shark Navigator Lift-Away NV351

Preview: Navigator Lift-Away NV351 26

Navigator Lift-Away NV351 26

Preview: Navigator Lift-Away NV350 Series

Navigator Lift-Away NV350 Series

Preview: Navigator Lift-Away NV355 Series

Navigator Lift-Away NV355 Series

Preview: Navigator Lift-Away NV380 Series

Navigator Lift-Away NV380 Series

Preview: Navigator Lift-Away DELUXE NV360 Series

Navigator Lift-Away DELUXE NV360 Series

Preview: Navigator Powered Lift-Away NV580 Series

Navigator Powered Lift-Away NV580 Series

Preview: Shark Navigator Lift-Away PRO

Shark Navigator Lift-Away PRO

Preview: Shark Navigator Lift-Away UV650

Shark Navigator Lift-Away UV650

Preview: Navigator Lift-Away ZU503AMZ

Navigator Lift-Away ZU503AMZ

Preview: Navigator LIFT-AWAY ADV LA400 Series

Navigator LIFT-AWAY ADV LA400 Series