Shark Navigator Lift-Away PRO User Manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Handle with Stretch Hose
B
Floor Nozzle
C
Extension Wand
D
Accessory Holder
E
Portable Lift-Away® Canister
WHAT’S INSIDE
MAINTENANCE
NV355_QSG_REV_Mv3
A
B
C
QUICK START GUIDE
H
D
E
F
F
8" Crevice Tool
G
Dusting Brush
H
Wide Upholstery tool
G
Empty dust cup after each use
Press top
Dust Cup Release
latch to access
dust screen and
remove built-up
debris asrequired.
Pull up on
Dust Cup
Release latch
and lift dust cup
o canister.
Hold Dust Cup over
a trash bin and press
the empty-release
latch on the bottom.
Remove any string,
carpet fibers, or hair
that may be wrapped
around the brushroll.
Detach the motorized
nozzle from the portable
Lift-Away canister.
Pre-Motor (foam and felt):
With the dust cup removed, take out and rinse the
foam and felt filters with water only.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull
the Filter Access latch to remove the grill. Remove and
rinse the HEPA filter with water only. Let all filters air-dry
completely before reinstalling.
TIP:
Wash filters every
3 months to keep
the suction strong.
Rinse filters and allow
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Easy brushroll maintenance
Cleaning Filters
Post-Motor
Pre-Motor
1
(Click)
2
(Click)
3
(Click)
4
(Click)
Insert canister into
motorized floor nozzle.
Connect handle to the wand,
pressing until it clicks into place.
Connect hose to the back of the
canister pressing until it clicks
into place.
Insert wand into the
canister.
LIFT-AWAY ® PRO

Shark Navigator Lift-Away PRO Specifications

General

Model Number	NV356E
Model	Navigator Lift-Away PRO
Category	Vacuum Cleaner
Type	Upright
Technology	Lift-Away
Filter Type	HEPA
Warranty	5 years
Filtration	Anti-Allergen Complete Seal Technology
Cord Length	25 ft
Weight	13.7 lbs
Features	Swivel Steering