Please be sure to read the Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Motorized Floor Nozzle
C
Handle & Hose
D
Wand
E
Accessory Holder
F
Duster Crevice Tool
G
Hair Removal Multi-Tool
H
Pet Power Brush
WHAT’S INSIDE TIPS
EMPTYING THE DUST CUP
CHECKING FOR BLOCKAGES
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor
filters every 3 months
and HEPA filter once a
year. Rinse with water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed Owner’s
Guide for more
information on how
to clean and replace
the filters.
A
C
E
D
Attach your
desired accessory
(Click)
(Click)
(Click)
(Click)
(Click)
B
Use a coin to turn locks, then rotate cover open.
Clean o any debris on bristles, and clear the debris intake.
With Zero-M
TM
technology, the brushroll actively removes
hair wrap while you vacuum, sending it to the dust cup.
Check for blockages or objects stuck in the brushroll.
If any hair is wrapped around brushroll, extending cleaning
time will help it clear.
clean
Q
UICK START GUIDE for REFURBISHED UNITS
LIFT-AWAY
®
F
G H
For quick cord
access, rotate
upper hook down
and remove cord.
Use cord clip
to secure cord
while in use.
To store your
vacuum, wrap
cord around
cord hooks.
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
Brushroll access
Unlock Open Cover Clear Intake
OR
To Next Page
Need help?
General
