Shark ROCKET UZ155 - Page 3

*804009753B*
*804009753B*
PRINTED IN MEXICO Elbrd: J.E. OBPN: N/A
SHNMDL:UZ155_B SC: 09-10-2024_1P
PRINTED IN MEXICO Elbrd: J.E. OBPN: N/A
SHNMDL:UZ155_B SC: 09-10-2024_1P
804009753A
804009753A
Note:
The images shown here are for
illustrative purpose only and may vary.
Note:
The images shown here are for
illustrative purpose only and may vary.
Note:
Accessories may vary
depending on the model.
Note:
Accessories may vary
depending on the model.
1.
Insert
Wand
into
Floor Nozzle.
2.
Insert
Handheld Vacuum
into wand.
1.
Insert
Wand
into
Floor Nozzle.
2.
Insert
Handheld Vacuum
into wand.
For proper operation, ensure all
components are completely connected
and clicked into place.
For proper operation, ensure all
components are completely connected
and clicked into place.