Shark Rocket IX141 User Manual

QUICK
START
GUIDE
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
IX141_QSG_MP_Mv9
VERSATILE CLEANING
EMPTYING THE DUST CUP
1. To empty the dust cup,
first disconnect the
handheld vacuum from
the wand by pressing
the Wand Release
button and pulling
up on the handheld
vacuum.
2. Position the dust
cup over a trash
bin and slide the
CleanTouch™ Dirt
Ejector Button
forward.
Wand Release
Button
CleanTouch
Dirt Ejector
Button
IX141
Slide the power button
to the desired setting.
Step on the floor nozzle
and tilt the handheld
vacuum back.
To detach the wand for
above-floor cleaning, stand
the vacuum upright, then
press the Nozzle Release
button on the bottom of the
wand and pull the wand up
to disconnect it.
To detach the handheld
vacuum, press the Wand
Release button and lift the
handheld vacuum o the
wand.
Attach a cleaning accessory,
then choose the power
setting.
NOTE: Brushroll will only engage
when the handle is tilted back.
OR
THEN
CORDLESS VACUUM
Use this Quick Start Guide
to start using your new
vacuum’s great features.
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
ROCKET®
©2019 SharkNinja Operating LLC. SHARK and ROCKET are registered trademarks of SharkNinja.
CLEANTOUCH is a trademark of SharkNinja Operating LLC.

Shark Rocket IX141 Specifications

General

Type	Cordless Stick Vacuum
Battery Type	Lithium-Ion
Run Time	Up to 40 minutes
Model Number	IX141
Cord Type	Cordless
Filtration	HEPA Filter
Attachments	Crevice Tool
Special Features	Swivel Steering, LED Headlights

Summary

Versatile Cleaning

Detaching Wand for Above-Floor Cleaning

Detach the wand for above-floor cleaning by pressing the Nozzle Release button on the wand's bottom.

Detaching Handheld Vacuum from Wand

Detach the handheld vacuum by pressing the Wand Release button and lifting it off the wand.

Accessory Attachment and Power Selection

Attach a cleaning accessory, then choose the desired power setting for operation.

Emptying the Dust Cup

Disconnecting Handheld for Emptying

First, disconnect the handheld vacuum from the wand by pressing the Wand Release button.

Activating Dirt Ejection

Position the dust cup over a trash bin and slide the CleanTouch™ Dirt Ejector Button forward.

Assembly

Connecting Vacuum Components

Assemble the vacuum by connecting the handheld unit, wand, and floor nozzle with audible clicks.

Power Settings

Selecting Cleaning Modes

Choose between OFF, BARE FLOOR/AREA RUGS, and CARPET settings based on surface type.

Using Boost Mode

Pull the Trigger on the handheld vacuum for an added boost in power; release to return to standard.

Li-Ion Battery Indicators

Understand the battery indicator lights showing charge level: Full, Nearly Full, Mid, Low, or Empty.

Charging

Charging the Handheld Vacuum

Remove the handheld vacuum from the wand and plug the charger into its charging port.

Battery Run Time Summary

View run times for Hand Vac (40 min), Bare Floor/Carpet (25 min), and Boost Mode (10 min).