Shark Rocket PRO IZ162H User Manual

QUICK
START
GUIDE
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
IZ162H_QSG_MP_Mv10
EMPTYING THE DUST CUP
1. To empty the dust cup,
first disconnect the
handheld vacuum from
the wand by pressing
the Wand Release
button and pulling
up on the handheld
vacuum.
Wand Release
Button
CleanTouch
Dirt Ejector
IZ162H
CORDLESS VACUUM
Use this Quick Start Guide
to start using your new
vacuum’s great features.
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
PRO
ROCKET®
VERSATILE CLEANING
Slide the power button
to the desired power
setting. Place your foot
on the floor nozzle
and tilt the handheld
vacuum back.
To detach the wand for
above-floor cleaning, stand
the vacuum upright, then
press the Nozzle Release
button on the bottom of the
wand and pull the wand up
to disconnect it.
To detach the handheld
vacuum, press the Wand
Release button and lift the
handheld vacuum o the
wand.
Attach a cleaning accessory,
then choose the power
setting.
NOTE: Brushroll will only engage
when the handle is tilted back.
OR
THEN
2. Position the dust
cup over a trash
bin and slide the
CleanTouch™ Dirt
Ejector forward.
©2019 SharkNinja Operating LLC. SHARK and ROCKET are registered trademarks of SharkNinja
Operating LLC. CLEANTOUCH and DIRT ENGAGE are trademarks of SharkNinja Operating LLC.

Shark Rocket PRO IZ162H Specifications

General

Type	Cordless Stick Vacuum
Weight	9.5 lbs
Battery Life	Up to 40 minutes
Cord Type	Cordless
Bagged or Bagless	Bagless
Voltage	25.2V
Battery Type	Lithium-ion
Runtime	Up to 40 minutes
Filtration	HEPA
Accessories	Crevice tool, Dusting brush
Features	LED headlights, multi-surface cleaning, Lightweight design

Summary

VERSATILE CLEANING

Detaching Wand for Above-Floor Cleaning

Instructions for detaching the wand for versatile cleaning options.

Detaching Handheld Vacuum

Steps to detach the handheld unit from the wand for different cleaning tasks.

EMPTYING THE DUST CUP

Disconnect Handheld Unit

Step to disconnect the handheld vacuum from the wand for dust cup access.

Eject Dust Cup Contents

How to use the CleanTouch™ Dirt Ejector to empty the dust cup.

ASSEMBLY

Vacuum Component Assembly

Guide for connecting the handheld vacuum, wand, and floor nozzle.

POWER SETTINGS

Operating Modes

Explanation of power settings: Off, Bare Floor/Area Rugs, and Carpet.

Boost Mode Activation

How to engage Boost Mode for maximum suction power.

CHARGING AND BATTERY MANAGEMENT

Li-Ion Battery Handling

Instructions for inserting and removing the Li-Ion battery.

Battery Status and Charge Times

Information on battery indicator lights and charge duration.