Shark Rocket Pro PowerFins IZ362H User Manual

QUICK
START
GUIDE
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
IZ362H_QSG_MP_Mv4_200820
EMPTYING THE DUST CUP
1. To empty the dust cup,
first disconnect the
handheld vacuum from
the wand by pressing
the Wand Release
button and pulling
up on the handheld
vacuum.
Wand Release
Button
CleanTouch
Dirt Ejector
IZ362H
POWERFINS CORDLESS VACUUM
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
PRO
ROCKET®
VERSATILE CLEANING
Slide the power button
to the desired power
setting. Place your foot
on the floor nozzle
and tilt the handheld
vacuum back.
To detach the wand for
above-floor cleaning, stand
the vacuum upright, then
press the Nozzle Release
button on the bottom of the
wand and pull the wand up
to disconnect it.
To detach the handheld
vacuum, press the Wand
Release button and lift the
handheld vacuum o the
wand.
Attach a cleaning accessory,
then choose the power
setting.
NOTE: Brushroll will only engage
when the handle is tilted back.
OR
THEN
2. Position the dust
cup over a trash
bin and slide the
CleanTouch™ Dirt
Ejector forward.
© 2020 SharkNinja Operating LLC. ROCKET and SHARK are registered trademarks of SharkNinja
Operating LLC. CLEANTOUCH is a trademark of SharkNinja Operating LLC.

Shark Rocket Pro PowerFins IZ362H Specifications

General

Brand	Shark
Model	Rocket Pro PowerFins IZ362H
Category	Vacuum Cleaner
Language	English

Summary

Versatile Cleaning

Detach Wand for Above-Floor Cleaning

Instructions for detaching the vacuum wand for above-floor cleaning.

Detach Handheld Vacuum

Instructions for detaching the handheld vacuum from the wand.

Attach Cleaning Accessory

Steps to attach a cleaning accessory after detaching the handheld.

Emptying the Dust Cup

Disconnect Handheld Vacuum

First step to empty dust cup: disconnect handheld from wand.

Empty Dust Cup

Position dust cup and slide ejector to empty debris into trash.

Assembly

Vacuum Assembly Steps

Step-by-step instructions for assembling the vacuum components.

Power Settings

Power Off

How to turn the vacuum off using the power slide switch.

Bare Floor/Area Rugs Setting

How to use the vacuum for bare floors and small area rugs.

Carpet Setting

How to use the vacuum for carpets, including deep cleaning.

Boost Mode Activation

How to activate Boost Mode for extra power using the trigger.

Charging

Battery Insertion and Removal

Instructions for inserting and removing the Li-Ion battery.

Battery Indicator Lights

Explanation of the battery indicator lights status.

Battery Runtime Information

Details on battery runtime for different modes and vacuum parts.

Charging Time Estimate

Information about the approximate charging time for the battery.