Shark ROCKET PRO IZ163H User Manual

QUICK
START
GUIDE
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
IZ163H_QSG_E_MP_Mv2
EMPTYING THE DUST CUP
1. To empty the dust cup,
first disconnect the
handheld vacuum from
the wand by pressing
the Wand Release
button and pulling
up on the handheld
vacuum.
Wand Release
Button
CleanTouch
Dirt Ejector
IZ163H
CORDLESS MULTIFLEX® VACUUM
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
PRO
ROCKET®
2. Position the dust
cup over a trash
bin and slide the
CleanTouch™ Dirt
Ejector forward.
© 2020 SharkNinja Operating LLC. MULTIFLEX, SHARK, and ROCKET are registered trademarks of SharkNinja
Operating LLC. CLEANTOUCH and DIRT ENGAGE are trademarks of SharkNinja Operating LLC.
MULTIFLEX STORAGEMULTIFLEX® REACH
To store, press the MultiFLEX Lock
Release button and fold the handheld
vacuum forward.
To vacuum, press the release button
and lift up the handheld vacuum, until
the wand locks in place.
Press the MultiFLEX Lock Release
button to lower the angle of the wand
to increase your reach.
MultiFLEX
Lock Release

Shark ROCKET PRO IZ163H Specifications

General

Model Number	IZ163H
Corded	No
Weight	9.5 lbs
Runtime	Up to 40 minutes
Filtration	HEPA
Accessories	Crevice Tool, Upholstery Tool
Features	Lightweight

Summary

Multiflex Reach

Multiflex Storage

Emptying the Dust Cup

Assembly

Power Settings

Off Power Setting

Slide switch to the top to turn off power.

Bare Floor/Area Rugs Setting

Slide switch to the middle for slow brushroll speed on bare floors.

Carpet Setting

Slide switch to the bottom for faster brushroll speed on carpets.

Boost Mode

Pull the Trigger on the handheld vacuum for an added boost in power.

Charging

Battery Insertion and Removal

Slide the Battery into the slot or press the Battery Release Button to remove.

Li-Ion Battery Status

Battery Indicator In Use

Indicator lights show battery charge level during vacuum operation.

Battery Indicator Charging

Indicator lights show battery charge status while charging.