EasyManua.ls Logo

Shark Rocket R-IX141

Shark Rocket R-IX141
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
QUICK
START
GUIDE
Please make sure to read
the Shark® Owner’s Guide prior to using your vacuum. The
Owner's Guide is available for download at www.sharkclean.com
VERSATILE CLEANING
EMPTYING THE DUST CUP
1. To empty the dust cup,
first disconnect the
handheld vacuum from
the wand by pressing
the Wand Release
button and pulling
up on the handheld
vacuum.
2. Position the dust
cup over a trash
bin and slide the
CleanTouch™ Dirt
Ejector Button
forward.
Wand Release
Button
CleanTouch
Dirt Ejector
Button
R-
IX141
Slide the power button
to the desired setting.
Step on the floor nozzle
and tilt the handheld
vacuum back.
To detach the wand for
above-floor cleaning, stand
the vacuum upright, then
press the Nozzle Release
button on the bottom of the
wand and pull the wand up
to disconnect it.
To detach the handheld
vacuum, press the Wand
Release button and lift the
handheld vacuum o the
wand.
Attach a cleaning accessory,
then choose the power
setting.
NOTE: Brushroll will only engage
when the handle is tilted back.
OR
THEN
CORDLESS VACUUM
REFURBISHED IN THE USA
Use this Quick Start Guide
to start using your new
vacuum’s great features.
For questions, visit Shark
online at sharkclean.com/
support
ROCKET®
©2019 SharkNinja
Operating LLC. SHARK and ROCKET are registered trademarks of SharkNinja. CLEANTOUCH is a
trademark of SharkNinja Operating LLC.
efurbished by America’s Remanufacturing Company, an independent company not affiliated with SharkNinja Operating LLC.
This product is warranted and supported by America’s Remanufacturing Company.
Question and Answer IconNeed help?

Do you have a question about the Shark Rocket R-IX141 and is the answer not in the manual?

Shark Rocket R-IX141 Specifications

General IconGeneral
BrandShark
ModelRocket R-IX141
CategoryVacuum Cleaner
LanguageEnglish

Summary

Versatile Cleaning Operations

Vacuum Configuration and Attachment

Detach wand for above-floor use or handheld from the wand.

Initial Operation and Accessory Attachment

Start vacuum by tilting, attach accessories, and select power settings.

Dust Cup Maintenance

Dust Cup Emptying Procedure

Disconnect handheld, position dust cup, and slide ejector button forward.

Vacuum Assembly

Component Assembly Steps

Connect handheld vacuum, wand, and floor nozzle for assembly.

Power Settings and Battery

Power Mode Selection

Choose between OFF, Bare Floor, Carpet, and Boost modes for optimal cleaning.

Li-Ion Battery Indicator and Charging

Understand battery status indicators and how to charge the vacuum's battery.

Related product manuals