To Next PageTo Next PageWhy is my Shark SV772 Vacuum Cleaner not picking up?
If your Shark Vacuum Cleaner isn't picking up or the suction power is weak, you should: 1. Empty the dust cup container. 2. Remove the dust cup filter and check for any obstructions in the air duct, removing them if present. Clean or replace the dust cup filter. 3. Charge the unit.
What to do if my Shark SV772 Vacuum Cleaner will not operate?
If your Shark Vacuum Cleaner will not operate: 1. Charge the unit. 2. Check the fuse or breaker and replace the fuse or reset the breaker if necessary. 3. Return the cordless vacuum to EURO-PRO Operating LLC for battery replacement.
How to stop dust escaping from my Shark SV772 Vacuum Cleaner?
If dust is escaping from your Shark Vacuum Cleaner: 1. Empty the dust cup container. 2. Review the dust cup filter installation instructions. 3. Replace the dust cup filter.
Official guide for operating and maintaining the Shark Cordless Hand Vac.
Specifies the model numbers (SV772-SV772C) and voltage (7.2 V DC) for the device.
Official guide for operating and maintaining the Shark Cordless Hand Vac.
Specifies the model numbers (SV772-SV772C) and voltage (7.2 V DC) for the device.
General| Brand | Shark |
|---|---|
| Model | SV772 |
| Category | Vacuum Cleaner |
| Language | English |
