Shark V1700Z User Manual

Copyright © EURO-PRO OPERATING LLC 2007
Cordless Sweeper
Barredor Inalámbrico
V1700Z
4.8 Volt DC - 4,8 Volt CD
IMPORTANT
IMPORTANT
To Maximize the life of your NiCd batteries:
1. Charge for a minimum of 20 hours before initial use.
Failure to do so will reduce the product’s battery life
significantly.
2. Do not store unit with the charging adapter attached
and plugged in.
3. Only recharge when the batteries are fully discharged
(or as close to fully discharged as possible).
4. Do not store in areas of high temperature or humidity.
5. After 3 months of non-use, the product should be fully
discharged and then recharged to maximize battery
power.
6. Use only the charger supplied with the product. If other
chargers are used, the batteries can fail causing damage to
the battery, product, or personal property.
NiCd batteries have a long useful life but at some time they
will need to be replaced. To purchase replacement batteries,
visit www.sharkvac.com
Note: 1. The On/Off switch must be in the “Off” position in
order to charge the unit. If the charging indicator
does not light, depress the On/Off switch once.
2. If the product has never been used or has been
stored for an extended period of time without use – it
will take several complete charge and discharge
cycles to realize the full operational time of your
product.

Shark V1700Z Specifications

General

Brand	Shark
Model	V1700Z
Category	Blower
Language	English

Summary

Welcome to Your New Shark Cordless Sweeper

Maximizing NiCd Battery Life

Initial Charging Requirements

Charge for a minimum of 20 hours before initial use to ensure optimal battery life.

Proper Charging and Storage Practices

Avoid storing with charger attached; recharge only when fully discharged for best results.

Long-Term Battery Maintenance

After 3 months of non-use, fully discharge and recharge to maintain battery power.

Shark Cordless Sweeper One Year Limited Warranty

Key Safety Precautions for Cordless Sweeper Use

General Usage and Electrical Safety

Follow basic safety rules, avoid wet surfaces, keep away from children and heat sources.

Charger, Cord, and Battery Safety

Handle charger with dry hands, do not damage cord, recycle batteries properly.

Operational Safety and Restrictions

Keep openings clear, do not pick up hot ashes or liquids, use only on dry surfaces.

Shark Cordless Sweeper Parts Identification

Operating Your Shark Cordless Sweeper

Assembling the Cordless Sweeper

Guide to assembling the sweeper parts, including handle and extension tubes.

Initial Operation and Setup

Charge for 20 hours initially; use the On/Off switch to operate the unit.

Cleaning the Dust Container

Instructions on how to empty, clean, and reattach the dust container.

Shark Cordless Sweeper Charging Procedures

Connecting the Charger and Indicator Light

Connect charger to sweeper and outlet; indicator light confirms charging status.

Optimizing Battery Performance Through Charging

Achieve peak performance after cycles; monthly full discharge recommended.

Battery Removal and Proper Disposal

Steps for Battery Removal

Follow steps to remove battery pack, disconnect terminals, and replace.

Guidelines for Battery Disposal

Dispose of Ni-Cd batteries properly; recycle at an authorized center.

Sweeper Care, Maintenance, and Storage

Routine Cleaning and Maintenance

Clean unit monthly with a dry cloth, avoid abrasives and water immersion.

Storage Recommendations for Sweeper

Store sweeper on a wall hook using the slot on the back of the upper handle.

Troubleshooting Common Shark Cordless Sweeper Issues

Sweeper Will Not Operate

Check power, fuse/breaker, servicing needs, or battery placement.

Sweeper Not Picking Up Debris

Ensure dust container is empty and unit is recharged; check for clogs.

Sweeper Not Charging

Verify outlet, charging adapter, or battery function; ensure unit is OFF.