Do you have a question about the Sharkoon TG4 and is the answer not in the manual?
Type | PC |
---|---|
Material | Tempered glass |
Form factor | Midi Tower |
Product color | Black |
Cable management | Yes |
Illumination color | Blue, Green, Red |
Maximum PSU length | 265 mm |
Number of 2.5\" bays | 4 |
Number of 3.5\" bays | 2 |
Illumination location | Case fans |
Number of 5.25\" bays | 0 |
Maximum CPU cooler height | 160 mm |
Number of expansion slots | 6 |
Maximum graphics card length | 375 mm |
Supported motherboard form factors | ATX, Micro ATX, Mini-ITX |
Rear fans installed | 1x 120 mm |
Front fans installed | 3x 120 mm |
Front fans diameters supported | 120 mm |
Number of rear fans supported (max) | 1 |
Number of front fans supported (max) | 3 |
Package depth | 480 mm |
Package width | 260 mm |
Package height | 515 mm |
Package weight | 6300 g |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Power supply included | No |
Supported HDD sizes | 2.5, 3.5 \ |
Harmonized System (HS) code | 84733080 |
Depth | 455 mm |
---|---|
Width | 200 mm |
Height | 430 mm |
Weight | 5300 g |
Details on form factor, expansion slots, interior painting, cable management, side panel, chassis color, and dimensions.
Information on addressable RGB type, ports, manual control modes, and pinout configuration.
Specifies top panel I/O ports (USB, Audio) and maximum supported drive bays (3.5", 2.5").
Details on the number and type of addressable RGB LED fans pre-installed in the front and rear.
Lists supported motherboard form factors and maximum clearances for graphics cards and CPU coolers.
Lists the items included in the product packaging, such as the case, accessory set, and manual.
Liability limitations for data loss and product specification change policies.
Guidance on the environmentally responsible disposal of electronic products according to EU directives.
Step-by-step visual instructions for installing 3.5-inch HDDs into the drive bays.
Visual guide demonstrating the installation process for 2.5-inch HDDs and SSDs.
Instructions on mounting additional expansion cards like graphics cards into the PCIe slots.
Guidance on how to detach, clean, and reattach the PC case's dust filters.
Instructions for connecting and controlling addressable RGB via the motherboard's RGB header.
Guide to manually switching RGB modes using the case's reset button.