Sharp 13L-M100B User Manual

24
LANG GEUA
BL E NSCREEU
CH SETT I NG
:OFF
BL EUSCREEN
:ON
BL EUSCREEN
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
3 Press VOL (+) or (–) to access SET UP mode.
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.
5 Press VOL (+) or (–) to select “ON”.
6 Press MENU to exit.
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
→
(MAIN MENU screen)
Set Up (Continued)
(SET UP mode)
(BLUE SCREEN select mode)
SL EP TIMER
SET UP
E
V I DEO ADJUST
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
2.4 Press MENU to exit.
Note:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
D+:
AIR
C
HMEMORY
ADTO
2
1
E–:
AIR
CH MEMORY
ESTO AR
21
VOL (+)
To add channel 12 to
the TV memory
VOL (–)
To erase channel 12 from
the TV memory
(CH MEMORY
memorized channel)
(CH MEMORY
unmemorized channel)
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
23-25 13L-M100B/150B.p65e 4/23/99, 6:41 PM24

Sharp 13L-M100B Specifications

General

Brand	Sharp
Model	13L-M100B
Category	TV
Language	English