MUTE
LOCATION OF USER'S CONTROL
Infrared Transmitter Window
INPUT
Pressž Switch to external video input
mode.
Press againž Switch to TV mode.
CHANNEL UP/DOWN
(p ) Selects next higher channel.
(q ) Selects next lower channel.
MENU
Pressž Accesses MAIN MENU.
Pressž again Exits MAIN MENU.
DISPLAY
Pressž Displays receiving channel for
4 seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
Front Panel
CHANNEL UP/DOWN
( p) Selects next higher channel.
( q ) Selects next lower channel.
VOLUME UP/DOWN
(+) Increases sound.
(– ) Decreases sound.
POWER
Pressž On.
Pressž again Off.
Basic Remote Control Functions
POWER
Pressž On.
Press againž Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLAS HBACK
Returns to previous channel.
VOLUME UP/DOWN
(+) Increases sound.
(– ) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
Pressž Mutes sound.
Press againž Restores sound.
• CLOSED CAPTION appears when
sound is muted.
MENU
Press
ž Accesses MAIN MENU.
Press again
ž Exits MAIN MENU.
ON TIMER
POWER indicator.
SENSOR AREA FOR
REMOTE CONTROL
VIDEO/AUDIO TERMINALS
(VIDEO/AUDIO terminals are also
provided on the rear.)
IN
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic mater ial, so it is safe to use.
• The degree of illumination will var y depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will var y depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
14LK14
4
To Next Page
Loading...