Sharp 27F641 - Auto Input

35
Dimension: 140 X 215 mm
Auto Input
•
The unit is preset to switch to the INPUT 2 screen automatically
when VIDEO equipment is connected to the INPUT 2 terminal. Do
the following to switch this feature off:
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E” mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press
CH a/s to move the “E” mark to “AUTO INPUT”.
4 Press VOL k/l to access the AUTO INPUT select screen.
Press VOL k/l to select “AUTO”.
5 You may turn off “AUTO INPUT” when it is not in use.
Press VOL k/l to select “OFF”.
6 Press MENU to exit.
VOLUME
(
k )/( l )
CHANNEL
UP (
a )/
DOWN (
s )
MENU
MENU
CH
CH
→
MENU
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
BLUE SCREEN
SET UP
PERSONAL PREF.
UN I VERSAL
LANGUAGE
CH SETT I NG
CH / I NPUT I D
AUTO I NPUT
SCREEN FORMAT
PLUS
(MAIN MENU screen)
(SET UP screen)
AUTO I NPUT
(INPUT2)
: AUTO
(AUTO INPUT select screen)
AUTO I NPUT
(INPUT2)
: OFF
CH
CH
→
27F541 35