Sharp 32U-S50B

32
Auto Input
•
The unit is preset to switch to the INPUT 2 screen automatically
when VIDEO equipment is connected to the INPUT 2 terminal. Do
the following to switch this feature off:
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E” mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press
CH a/s to move the “E” mark to “AUTO INPUT”.
4 Press VOL k/l to access the AUTO INPUT select screen.
Press VOL k/l to select “AUTO”.
5 You may turn off “AUTO INPUT” when it is not in use.
Press VOL k/l to select “OFF”.
6 Press MENU to exit.
VOLUME
( k )/( l )
CHANNEL
UP (
a )/
DOWN ( s )
MENU
→
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
BL UE SCREEN
SET UP
LANGUAGE
CH SETT I NG
AUTO I NPUT
(MAIN MENU screen)
(SET UP screen)
AUTO I NPUT
(INPUT2)
: AUTO
(AUTO INPUT select screen)
AUTO I NPUT
(INPUT2)
: OFF
→