Be sure to disconnect the power cord
from the wall outlet or turn off the circuit
breaker before performing any mainte-
nance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Lift the open panel.
3
Use a vacuum cleaner to remove dust. If
the shade before reinstalling.
4
open panel.
MAINTENANCE
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Dry the inside of the indoor unit thor-
oughly by taking the following steps.
(SMD models)
Run the unit in the SELF CLEAN operation mode.
(SED models)
Run the unit in the cool mode with temperature
setting of 30°C.
2
Stop the operation and unplug the
unit.
Turn of the circuit breaker, if you have one
exclusively for the air conditioner.
3
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
Wipe them with a soft cloth.
Do not directly splash or pour water on them.
It can cause electrical shock or equipment
damage.
Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
1
2
AH-AP9SMD&ED_OM_A908_En.indd 112015/3/24 16:54:20
To Next Page
Loading...
Need help?
General
