Sharp AH-X075E - Page 41

AH-X075E/X095E
AU-X07SE/X095E
AY-X075E/X09SE
AE-X07S5E/X095E
Remove
the
board
fastening
screws.
Drain
pan
and
related
How
to
remove
the
gear
box
assembly
Remove
two
screws
which
fasten
the
gear
box
assembly.
Note
When
installing
the gear
box
assembly,
fit
it,
aligning
the notch
shape
of the groove
of
the
vertical
adjusment
louver.
the angle of transformer
Pull out the board.
How to remove the vertical adjustment louver
Slightly fall down the hinge area, deflect the louver, and
remove it at one place. Remove the shaft from each of the
left and right sides.