Sharp AH-XS25UF - Before Calling for Service (Get the Error Code

EN-15
3
Press the FAN button once, the remote
control will display “ ”.
4
Press the THERMOSTAT button “ ”
and “ ”, remote control display
will change from “ ” to “ ” step by
step. Meanwhile, buzzer makes a short
beep sound on every step.
• When it displays “ ”, the buzzer will
make a long beep sound to remind you
this error code “ ” is sub error code.
ABOUT ERROR CODE
• The error code contains main code and sub
code.
Example
: error 23-4.
ERROR CODE
Main
Code
Sub
Code
GET THE ERROR CODE
Example
: error 23-4.
1
Press the THERMOSTAT button “ ”
for over 5 seconds on remote control
when the indoor unit and remote control
is off.
• The remote control will display “ ” and
there will be a beep sound from the unit’s
buzzer.
2
Press the THERMOSTAT button “ ”
and “ ”, remote control display
will change from “ ” to “ ” step by
step. Meanwhile, buzzer makes a short
beep sound on every step.
• When it displays “ ”, the buzzer will
make a long beep sound to remind you
this error code “ ” is main error code.
SEN SOR
1
4
SEN SOR
2
SEN SOR
3
SEN SOR
BEFORE CALLING FOR SERVICE
(GET THE ERROR CODE)
TINSEB026JBRZ.indb EN-15TINSEB026JBRZ.indb EN-15 4/28/2560 BE 2:49 PM4/28/2560 BE 2:49 PM