To Next PageTo Next PageWhat to do if Sharp AN-3DG10-R display 2D images in 3D mode?
If your Sharp 3D Glasses are displaying 2D images while in 3D mode, it might be that the glasses are set to 2D mode. To resolve this, press the power button twice while viewing 2D images. The LED light should blink 3 times, and the images should switch to 3D.
How to turn on Sharp AN-3DG10-R 3D Glasses?
If images appear doubled while wearing your Sharp 3D Glasses, ensure that the glasses are powered on. Press the power button for at least 2 seconds to turn them on.
General| Charging Time | Approximately 2 hours |
|---|---|
| Power Source | Rechargeable Battery |
| Battery Type | Lithium-ion |
| Charging Method | USB charging |
| Type | Active 3D glasses |
| Compatibility | Sharp 3D TVs |
| Battery Life | Approximately 30 hours |
Overview of the components of the 3D glasses, including power button and LED.
Instructions for attaching the nose pad for a better fit on the glasses.
Instructions for attaching the head strap for secure and comfortable wear.
Initial setup steps before first use, including removing the insulating sheet.
Guide on how to safely replace the device's button battery (CR2032).
Steps to power the 3D glasses on and off using the power button.
How to switch between 2D and 3D viewing modes using the power button.
Information on the operational range and automatic turn-off feature.
Care and handling instructions for the lenses to prevent damage and ensure quality.
Guidance on keeping the infrared receiver clean and unobstructed for proper function.
Warnings and precautions to take while viewing 3D content to avoid discomfort or injury.
Solutions for common problems encountered with the 3D glasses, such as doubled images.
Details specific to product model number, warranty period, and exclusions.
