Sharp Aquos 2T-C42BG1I

To Next Page

To Previous Page

Specifications (Hong Kong only)

Item Model: 2T-C32BG1X Model: 2T-C42BG1X

LCD panel 80 cm 105 cm

Resolution 1,049,088 pixels (1366 x 768) 2,073,600 pixels (1920 x 1080)

Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

TV Function

TV-standard

Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC

Digital DTMB

Receiving

Channel

VHF/UHF 44.25—863.25 MHz

CATV S1—S41 ch (including Hyperband)

TV-tuning system Auto Preset

STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M

Audio amplifier 7.5 W x 2

Terminals

ANT

(Antenna input)

Analogue

UHF/VHF 75 Ω DIN type

Digital

SERVICE ONLY 3.5 mm jack

INPUT 1 HDMI HDMI (HDMI input)

INPUT 2 HDMI HDMI (HDMI input)

INPUT 3 AUDIO in, VIDEO in

USB 1 USB (DC5V 0.5A output)

USB 2 USB (DC5V 1.5A output)

LAN (10/100 BASE-T) Network connector

OUTPUT Headphone ( 3.5 mm stereo)

OSD language

English/Simplified Chinese/Traditional Chinese/Hong Kong Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/Vietnamese/Indonesia/

Hebrew/Hindi/Malay

English/Simplified Chinese/Traditional Chinese (For DTV-HK)

Power Requirement AC 110 — 240 V, 50/60 Hz

Power Consumption 57 W (0.5 W Standby) 88 W (0.5 W Standby)

Dimensions without stand 731 (W) x 466 (H) x 75 (D) mm 956 (W) x 569 (H) x 81 (D) mm

with stand 731 (W) x 519 (H) x 195 (D) mm 956 (W) x 607 (H) x 239 (D) mm

Weight without stand (with stand) 5.0 kg (5.1 kg) 7.8 kg (8.0 kg)

Operating temperature 0°C to +40°C

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures

indicated are nominal values of production units. There may be some deviations from these values in individual units.

Specification may differ depending on the selected country.

CAUTION

Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no

responsibility for improper mounting or mounting that results in accident or injury.

Carefully read the instructions that come with the bracket before beginning work.

Appendix

EN 8-7