Sharp AQUOS 2T-C42EG1X - Troubleshooting; Remote Control Unit Does Not Operate; Clearing the Password; Password Reset Procedure

-
7
-
8
•
production units. There may be some deviations from these values in individual units.
•
CAUTION
•
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
•
Carefully read the instructions that come with the bracket before beginning work.
•
Do not install / mount the TV with tilting condition.
Viewing E-Manual Specifications
Viewing the Built-in Operation Manual
Displays the built-in operation manual on the screen. You
can read information about how to use this device.
1 Press
to select “Manual”, and then press ENTER.
(HOME) to display the HOME screen, press
This displays the built-in operation manual screen.
2 When you select contents, its page will be displayed.
1
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced.
Problem Possible Solution
•
No power.
•
Check if you pressed POWER on the remote control unit.
•
Is the AC cord disconnected?
•
Has the power been turned on?
•
Remote control unit does
not operate.
•
Are batteries inserted with polarity (+, –) aligned?
•
No picture.
•
Is connection to other components correct?
•
No sound.
•
Is connection to other components correct?
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1 From the DASHBOARD screen, select “Settings” > “System” > “About” > “Reset” > “Factory reset”, and then press
ENTER .
2 When you perform a reset, the TV will be returned to the factory preset values, and you need to set the password
again.
NOTE
•
As a precautionary measure, make a note of your password, and keep it in a safe place.
•
The default PIN is “1234”.
Symbols placed on equipment
• This mark indicates the product operates on AC Voltage.
• This mark indicates a class II or double insulated electrical appliance wherein the product does not
require a safety connection to electrical earth (ground).
Item Model 2T-C50EG1X 2T-C42EG1X
LCD panel 80 cm
Resolution 1,049,088 pixels
(1366 x 768)
Video colour system
TV function Analogue
Digital
VHF/UHF
DTV
TV-tuning system
STEREO/BILINGUAL
Audio amplifier
Terminals ANT (Antenna input)
HDMI 1 (ARC)
HDMI 2
HDMI 3
AV IN
USB 1
LAN (10/100 BASE-T)
OUTPUT
OSD language
Power requirement
Power consumption
Dimensions
Weight without stand (with stand)
Operating temperature
956 x 569 x 81 732 x 466 x 75
without stand
W x H x D (mm)
with stand
W x H x D (mm)
732 x 519 x 195 956 x 646 x 248
0
to +40
11.0 kg (11.5 kg) 7.6 kg (7.8 kg)
English (Philippines only)
AC 110 — 240 V, 50/60 Hz
110 W
0.6 W 0.6 W
Standby
87 W
1118 x 655 x 80
1118 x 720 x 273
4.9 kg (5.0 kg)
0.6 W
56 W
Network connector
Headphone (
3.5 mm stereo)
English/Simplified Chinese/Traditional Chinese/Arabic/French/Portuguese/Russian/
Thai/Vietnamese/Indonesia/Malay
English/Simplified Chinese/Traditional Chinese (Hong Kong)(Hong Kong only)
USB (DC5V 1.5A output)
USB 2
USB (DC5V 1.5A output)
Auto Preset
NICAM: B/G, I, D/K A2 stereo: B/G MTS:M
75 DIN type
HDMI (HDMI input), ARC
HDMI (HDMI input)
HDMI (HDMI input)
AUDIO in, VIDEO in
7.5 W x 2 10 W x 2
105 cm
2T-C32EG1X
126 cm
2,073,600 pixels (1920 x 1080)
TV-
standard
Receiving
channel
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
DTV / DTMB (Hong Kong only)
44.25—863.25 MHz
52.50—866.00 MHz (Hong Kong only)
q
SERVICE ONLY
3.5 mm jack
2
/
WIFI Protocole IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band
WIFI Security WFA/WPA/WPA2
Bluetooth V2.1/3.0/4.2/5.1