-
5
-
6
Item Model
4T-C60CK1X
mc 351lenap DCL
Resolution
8,294,400 pixels (3840
g
2160)
06 LAP/34.4 CSTN/85.3 CSTN/MACES/LAPmetsys ruoloc oediV
TV function TV-
standard
Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
Digital DVB-T
Receiving
channel
VHF/UHF 44.25—863.25 MHz
CATV S1—S41 ch (including Hyperband)
TV-tuning system Auto Preset
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M
Audio amplifi er
10 W
g
2
Terminals ANT (Antenna input)
UHF/VHF 75
q
DIN type
SERVICE ONLY
3.5 mm jack
INPUT 1 (ARC) HDMI HDMI (HDMI input), ARC
INPUT 2 HDMI HDMI (HDMI input)
INPUT 3 HDMI HDMI (HDMI input)
AV IN AUDIO in, VIDEO in
USB 1 USB (DC5V 1.5A output)
USB 2 USB (DC5V 1.5A output)
LAN (10/100 BASE-T) Network connector
DIGITAL AUDIO
OUTPUT
Optical S/PDIF digital audio output
OUTPUT
Headphone (
3.5 mm stereo)
ilpmiS/hsilgnEegaugnal DSO fi ed Chinese/Traditional Chinese/Hong Kong Chinese/
Arabic/French/Portuguese/Russian/Persian/Thai/Vietnamese/Indonesia/
Hebrew/Hindi/Malay
zH 06/05 ,V 042 — 011 CAtnemeriuqer rewoP
)ybdnatS W 6.0( W 581noitpmusnoc rewoP
Dimensions
without stand
1358 (W)
g
799 (H)
g
83 (D) mm
with stand
1358 (W)
g
864 (H)
g
300 (D) mm
Weight without stand (with stand) 17.5 kg (18.5 kg)
Operating temperature 0°C to +40°C
•
As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes
for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
•
Specifi cation may differ depending on the selected country.
CAUTION
•
Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
•
Carefully read the instructions that come with the bracket before beginning work.
Viewing E-Manual
Viewing the Built-in Operation Manual
Displays the built-in operation manual on the screen.
You can read information about how to use this device.
1 Press
(HOME) to display the HOME screen,
and then press
/ / / to select “Settings”.
Press
/ to select “Apps”, press / to
select “Manual”, and then press ENTER.
This displays the built-in operation manual screen.
2 When you select contents, its page will be
displayed.
1
2
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced.
noituloS elbissoP melborP
•
No power.
•
Check if you pressed POWER on the remote control unit.
•
Is the AC cord disconnected?
•
Has the power been turned on?
•
Remote control unit does
not operate.
•
Are batteries inserted with polarity (+, –) aligned?
•
No picture.
•
Is connection to other components correct?
•
No sound.
•
Is connection to other components correct?
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1 From the HOME screen, select “Settings” > “Device Preferences” > “Reset”, and then press ENTER.
2 When you perform a reset, the TV will be returned to the factory preset values, and you need to set the password
again.
NOTE
•
As a precautionary measure, make a note of your password, and keep it in a safe place.
Symbols placed on equipment
• This mark indicates the product operates on AC Voltage.
• This mark indicates a class II or double insulated electrical appliance wherein the product does not
require a safety connection to electrical earth (ground).
Specifi cations
To Next Page
Loading...
Need help?
General