IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding - If an outside antenna
is
connected
to
the television equipment, be sure the antenna
system
is
grounded so as
to
provide some protection against voltage surges and built-up static charges.
Article 810
of
the National Electrical Code, ANSI/NFPA 70, provides information with regard
to
proper grounding
of
the mast
and supporting structure, grounding
of
the lead-in wire
to
an
antenna discharge unit, size
of
grounding conductors, location
of antenna-discharge unit, connection
to
grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
NEC - NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
~~-
GROUND CLAMPS
":"~
POWER SERVICE GROUNDING ELECTRODE
SYSTEM
(NEC ART 250, PART
H)
r.
To prevent fire, never place any type
of
candle or flames on the
top
or near the TV set.
CJ
-
~
~
• To prevent fire or shock hazard,
do
not expose this product
to
dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• To prevent fire or shock hazard,
do
not place the AC cord under the TV set or other heavy
items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface
of
the display panel. Using a hard cloth may
~
scratch the panel surface.
~
• Use a soft damp cloth
to
gently wipe the panel when it
is
really dirty.
(It
may scratch the panel surface when wiped strongly.)
•
If
the panel
is
dusty, use an anti-static brush, which
is
commercially available,
to
clean it.
• To protect the panel,
do
not use a dirty cloth, liquid cleaners or chemical cloth
to
clean
it,
such materials may damage the panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
• Do not display a still picture for a long time, as this could cause an afterimage
to
remain.
@-5
To Next Page
Loading...
