Why is my Sharp LCD TV remote control not working?
The remote control might not be working due to several reasons. First, check if the batteries are correctly inserted, paying attention to the polarity (+ and -). If they are correctly inserted, try replacing them with new ones. Strong or fluorescent lighting, or a fluorescent light shining on the remote control sensor, can also interfere with the remote's operation.
What to do if my Sharp AQUOS LC-32D77X LCD TV has no sound?
If your Sharp LCD TV has no sound, first ensure that the volume is not set too low. Also, check that headphones are not connected to the TV, as this will mute the sound from the speakers.
Why does my Sharp AQUOS LC-32D77X suddenly turn off?
Your Sharp LCD TV might be turning off suddenly because the unit's internal temperature has increased. Remove any objects blocking the vent or clean the vent. You may also want to check the ECO setting and the sleep timer setting.
How to fix strange colors on Sharp AQUOS LC-32D77X LCD TV?
To fix strange colors on your Sharp LCD TV, start by adjusting the picture tone. If the room is too bright, the picture may appear dark. Also, check the color system setting, the input signal setting and the HDMI auto view setting.
How to adjust Sharp AQUOS LC-32D77X if the picture is cut off?
If the picture on your Sharp LCD TV is cut off, check if the image position is correct. Also, ensure that screen mode adjustments, such as picture size, are made correctly.
What to do if my Sharp LCD TV unit cannot be operated?
If your Sharp LCD TV unit cannot be operated, it might be due to external influences such as lightning or static electricity. Turn the power off, or unplug the AC cord, wait 1 or 2 minutes, and then re-plug it in to restore operation.
How to fix Sharp AQUOS LC-32D77X LCD TV with no power?
First, verify that you have pressed the POWER button on the remote control. If the indicator light on the TV is red, press POWER again. Also, check if the AC cord is properly connected. Finally, ensure that the power switch is turned on.
Why is there no picture on my Sharp LCD TV?
If there is no picture on your Sharp LCD TV, check the connection to external equipment. Make sure the input signal has been set up correctly after connection and that the correct input is selected. Also, ensure the picture adjustment is correct and the antenna is properly connected. Finally, confirm that 'On' is not selected in 'Audio only'.
General| Screen Size | 32 inches |
|---|---|
| Display Resolution | 1366 x 768 pixels |
| Panel Type | LCD |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 2000:1 |
| Brightness | 450 cd/m² |
| Response Time | 6 ms |
| Sound Output | 10W x 2 |
| Viewing Angle | 176° |
| Inputs | HDMI, Component, Composite, S-Video |
Essential guidelines for safe operation and handling of the television.
Lists all items included in the product package for setup and use.
Identifies registered logos and brands associated with the television.
Step-by-step instructions for assembling and attaching the TV stand.
Identifies the various buttons and indicators on the TV and remote.
Key steps to follow before powering on the TV for the first time.
Instructions for connecting and powering the antenna for optimal reception.
Guides through the first-time setup wizard for channel and language settings.
How to check and optimize antenna alignment for best signal reception.
Instructions for connecting various external equipment like VCRs, DVD players, etc.
Guide on how to properly insert batteries into the remote control unit.
Explanation of how to operate the TV using the remote control.
Warnings and tips for proper care and usage of the remote control.
Steps to power the television on and switch it to standby mode.
Overview of accessing and navigating the TV's on-screen menu system.
List of available menu options for TV and specific input sources.
List of available menu options for HDMI and RGB input sources.
How to perform an automatic scan to find and store TV channels.
Methods for changing TV channels using the remote control or number keys.
How to control the TV's audio output volume.
Procedure to change the on-screen display language of the TV menu.
Options for customizing channel order, skipping, and locking.
Manually adjust settings like frequency, sound system, and labels for channels.
Accessing features like channel recall, image freeze, and audio muting.
Features to reduce power consumption and extend backlight life.
Options to adjust the aspect ratio and display mode of the picture.
Manually choose from various picture aspect ratios like Normal, Cinema, Full.
Choose pre-defined picture and sound settings for different viewing scenarios.
Fine-tune picture parameters like backlight, contrast, and colour.
Detailed picture adjustments including hue, saturation, and colour temperature.
Adjustments for image position and game play time display.
Options to display the current time on the TV screen.
Customize audio settings such as bass, treble, and surround sound effects.
Equalizes volume levels between programmes and commercials.
Select the output format for digital audio signals.
View schedules for DTV events and detailed programme information.
Use the Electronic Programme Guide to find and tune to desired programmes.
Find programmes by selecting a specific genre or category.
Set timers for programmes using the EPG data.
Configure settings for devices connected via HDMI for optimal viewing.
Choose the correct input and signal type for connected external equipment.
Assign custom names to different input sources for easier identification.
Configure input selection to bypass HDMI or RGB sources.
Adjust the colour system for compatibility with external video signals.
Operate connected HDMI devices interactively using a single remote.
Instructions for physically connecting AQUOS LINK compatible devices.
Enable and configure HDMI CEC functions for device control.
Automatically turn on the TV and playback HDMI source in standby.
Route TV sound exclusively through connected AQUOS AUDIO speakers.
Access and play content from connected players or recorders via AQUOS LINK.
Steps for connecting a PC to the TV using an HDMI cable.
Steps for connecting a PC to the TV using analogue RGB and audio cables.
Select the appropriate picture size for PC display on the TV.
Automatically optimize PC image display for analogue connections.
Manually fine-tune PC image position, clock, and phase settings.
Manually set or register specific input resolutions for the PC signal.
Control TV functions from a PC via RS-232C connection.
Lists supported PC resolutions and connection types for optimal display.
Explanation of Teletext service and its broadcast information.
How to activate and operate the TV's Teletext function.
Set the correct language table for accurate Teletext display.
Enable and display subtitles tailored for hearing-impaired viewers.
Select preferred subtitle language for DVB broadcasts.
Solutions for common problems encountered with the television.
Explains error codes related to recording issues with AQUOS LINK.
Restore the TV settings to factory default values.
Access system information like message lists, receiver reports, and identification.
Technical details and specifications of the television models.
Information on available accessories, such as wall mount brackets.
Provides physical dimensions and layout diagrams for TV models.
Instructions for removing the stand for wall mounting.
Safety guidelines and procedures for wall-mounting the television.
Procedure to reset or clear a forgotten TV password.
Details regarding the software components and their licenses.
To Next Page