On Off
Auto power on
AQUOS LINK control
Selecting recorder
Using genre info.
Setting for AQUOS LINK control
50
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the
HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant device’s
power have been turned on. Change the external input source by pressing TV/VIDEO, select the appropriate external source
and verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
Connecting an AQUOS BD Player/AQUOS Recorder via
the AQUOS AUDIO speaker system
Connecting an AQUOS BD Player/
AQUOS Recorder only
AQUOS LINK setup
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “AQUOS LINK setup”,
and then press ENTER.
3
AQUOS LINK control
Press
a
/
b
to select “AQUOS LINK control”,
and then press ENTER.
4
Press
c
/
d
to select “On”, and then press
ENTER.
5
Press MENU to exit.
6
Optical audio
cable
HDMI-certifi ed cable
HDMI-certifi ed cable
AQUOS BD Player/
AQUOS Recorder
AQUOS AUDIO
speaker system
HDMI-certifi ed cable
AQUOS BD Player/
AQUOS Recorder
Set to “On” to enable HDMI CEC functions.
52D77X.indb 5052D77X.indb 50 2/17/09 5:13:39 PM2/17/09 5:13:39 PM
To Next Page
Loading...
